lkml.org 
[lkml]   [2018]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/2] clk: meson-g12a: Add EE clock controller driver
From
Date
Hi Jerome

On 2018/11/8 21:34, jbrunet@baylibre.com wrote:
> On Thu, 2018-11-08 at 21:15 +0800, Jian Hu wrote:
>> Changes since v3 at[4]
>> -add fixed clocks clk_regmap definition
>
> Jian,
>
> When replying to the v1 of your clk_ao patchset :
> https://patchwork.kernel.org/patch/10562563/#22177627
>
> I have explained that I would like to stop taking clock (such as xtal) from
> nowhere. Clocks (even the xtal) should be properly claimed through DT.
> I have specifically asked this to be taken into account for the EE controller.
>
> If you need an exemple on how to get the input clock from DT to your
> controller, please have look at the axg audio clock controller.
>
> This comment does not appear to be addressed in this version.
> Please make sure you have addressed all the comments of past reviews before
> reposting
>
> Thx
>

Thanks, I will resolve it, I want make sure for it.

I should take the "periphs_xtal" clock in ee g12a clock controller
driver through DT , And then I can get its clock name "xtal" by property
of clock-output-names. Is that right?

ee g12a clock dts:

hiubus: bus@ff63c000 {
compatible = "simple-bus";
reg = <0x0 0xff63c000 0x0 0x1c00>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;

sysctrl: syscon@0 {
compatible =
"amlogic,meson-g12a-hhi-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x400>;

clkc: clock-controller {
compatible = "amlogic,g12a-clkc";
#clock-cells = <1>;
clocks = <&xtal>;
clock-name = "periphs_xtal";
};
};
};


xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";


#clock-cells = <0>;
};
>>
>> Changes since v2 at[2]
>> -fix fixed clocks's descriptions
>> -fix aligment
>> -add enable bit for plls base on [3] patches
>> -add fixed clock gate bit
>>
>> Changes since v1 at[1]
>> -fix typo of 'Everything'.
>> -change the word 'AmLogic' to 'Amlogic'
>> -squash patch 1 and 2.
>> -delete usless message of "Trying obsolete regs".
>> -delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
>> -rebase on top of the "next/drivers" branch, and add g12a clock patch.
>> -add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
>> g12a_sd_emmc_c_clk0_sel.
>>
>> [1]
>> https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu@amlogic.com
>> [2]
>> https://lkml.kernel.org/r/1531728707-192230-2-git-send-email-jian.hu@amlogic.com
>> [3]https://lkml.kernel.org/r/20180717095617.12240-1-jbrunet@baylibre.com
>> [4]
>> https://lkml.kernel.org/r/1533890858-113020-1-git-send-email-jian.hu@amlogic.com
>>
>> Jian Hu (2):
>> dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
>> clk: meson-g12a: Add EE Clock controller driver
>>
>> .../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
>> drivers/clk/meson/Kconfig | 10 +
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/g12a.c | 1134
>> ++++++++++++++++++++
>> drivers/clk/meson/g12a.h | 128 +++
>> include/dt-bindings/clock/g12a-clkc.h | 93 ++
>> 6 files changed, 1367 insertions(+)
>> create mode 100644 drivers/clk/meson/g12a.c
>> create mode 100644 drivers/clk/meson/g12a.h
>> create mode 100644 include/dt-bindings/clock/g12a-clkc.h
>>
>
>
> .
>

\
 
 \ /
  Last update: 2018-11-09 09:06    [W:0.043 / U:2.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site