Messages in this thread Patch in this message | | | Subject | [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt | From | Heiner Kallweit <> | Date | Fri, 9 Nov 2018 18:16:28 +0100 |
| |
Flag PHY_HAS_INTERRUPT is used only here for this small check. I think using interrupts isn't possible if a driver defines neither config_intr nor ack_interrupts callback. So we can replace checking flag PHY_HAS_INTERRUPT with checking for these callbacks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- v2: - add helper for the check v3: - no changes --- drivers/net/phy/phy_device.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index ab33d1777..00a46218c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -2074,6 +2074,11 @@ static void of_set_phy_eee_broken(struct phy_device *phydev) phydev->eee_broken_modes = broken; } +static bool phy_drv_supports_irq(struct phy_driver *phydrv) +{ + return phydrv->config_intr || phydrv->ack_interrupt; +} + /** * phy_probe - probe and init a PHY device * @dev: device to probe and init @@ -2095,8 +2100,7 @@ static int phy_probe(struct device *dev) /* Disable the interrupt if the PHY doesn't support it * but the interrupt is still a valid one */ - if (!(phydrv->flags & PHY_HAS_INTERRUPT) && - phy_interrupt_is_valid(phydev)) + if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev)) phydev->irq = PHY_POLL; if (phydrv->flags & PHY_IS_INTERNAL) -- 2.19.1
| |