Messages in this thread | | | Date | Thu, 8 Nov 2018 09:25:22 +0100 | From | Maxime Ripard <> | Subject | Re: [PATCH 15/15] arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node |
| |
On Wed, Nov 07, 2018 at 06:13:08PM +0800, Chen-Yu Tsai wrote: > The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side > identifies as BCM43430, while the Bluetooth side identifies as BCM43438. > > The Bluetooth side is connected to UART1 in a 4 wire configuration. Same > as the WiFi side, due to being the same chip and package, DLDO2 provides > overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC > clock output provides the LPO low power clock at 32.768 kHz. > > This patch enables Bluetooth on this board, and also adds the missing > LPO clock on the WiFi side. There is also a PCM connection for Bluetooth, > but this is not covered here. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Thanks for figuring this out!
Maxime
-- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [unhandled content-type:application/pgp-signature] | |