Messages in this thread | | | Date | Wed, 7 Nov 2018 02:00:30 +0000 (UTC) | From | Paul Walmsley <> | Subject | Re: [PATCH v2 2/3] dt-bindings: clk: add documentation for the SiFive PRCI driver |
| |
On Tue, 6 Nov 2018, Stephen Boyd wrote:
> Quoting Paul Walmsley (2018-10-20 06:50:23) > > diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt > > new file mode 100644 > > index 000000000000..d7c1e83fa5ed > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt > > @@ -0,0 +1,43 @@ > > +SiFive FU540 PRCI bindings > > + > > +On the FU540 family of SoCs, most system-wide clock and reset integration > > +is via the PRCI IP block. > > + > > +Required properties: > > +- compatible: Should be "sifive,<chip>-prci<version>". As of the time this > > + file was written, only one value is supported: > > I don't think we need the "As of the time" sentence. It will become out > of date almost immediately so why not just say "The list of supported > values is:"?
Adopted this change. Thanks for the review.
- Paul
| |