lkml.org 
[lkml]   [2018]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/23] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number
Date
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The reset value is all zero, so set a workable value for Primary,
Secondary and Subordinate bus numbers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 3da924bb6b3c..8d6a1e98f655 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -581,6 +581,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
u32 value, pab_ctrl, type;
struct resource_entry *win;

+ /* setup bus numbers */
+ value = csr_readl(pcie, PCI_PRIMARY_BUS);
+ value &= 0xff000000;
+ value |= 0x00ff0100;
+ csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
/*
* program Bus Master Enable Bit in Command Register in PAB Config
* Space
--
2.17.1
\
 
 \ /
  Last update: 2018-11-06 14:21    [W:0.110 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site