lkml.org 
[lkml]   [2018]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: clk: Introduce 'protected-clocks' property
On Mon 05 Nov 11:40 PST 2018, Stephen Boyd wrote:

> Add a generic clk property for clks which are not intended to be used by
> the OS due to security restrictions put in place by firmware. For
> example, on some Qualcomm firmwares reading or writing certain clk
> registers causes the entire system to reboot, but on other firmwares
> reading and writing those same registers is required to make devices
> like QSPI work. Rather than adding one-off properties each time a new
> set of clks appears to be protected, let's add a generic clk property to
> describe any set of clks that shouldn't be touched by the OS. This way
> we never need to register the clks or use them in certain firmware
> configurations.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Cc: Taniya Das <tdas@codeaurora.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> .../devicetree/bindings/clock/clock-bindings.txt | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> index 2ec489eebe72..b646bbcf7f92 100644
> --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
> +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -168,3 +168,19 @@ a shared clock is forbidden.
>
> Configuration of common clocks, which affect multiple consumer devices can
> be similarly specified in the clock provider node.
> +
> +==Protected clocks==
> +
> +Some platforms or firmwares may not fully expose all the clocks to the OS, such
> +as in situations where those clks are used by drivers running in ARM secure
> +execution levels. Such a configuration can be specified in device tree with the
> +protected-clocks property in the form of a clock specifier list. This property should
> +only be specified in the node that is providing the clocks being protected:
> +
> + clock-controller@a000f000 {
> + compatible = "vendor,clk95;
> + reg = <0xa000f000 0x1000>
> + #clocks-cells = <1>;
> + ...
> + protected-clocks = <UART3_CLK>, <SPI5_CLK>;
> + };
> --
> Sent by a computer through tubes
>

\
 
 \ /
  Last update: 2018-11-06 02:05    [W:0.048 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site