lkml.org 
[lkml]   [2018]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v4 2/2] staging: iio: ad7780: remove unnecessary stashed voltage value
This patch removes the unnecessary field int_vref_mv in ad7780_state
referring to the device's voltage.

Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
---
Changes in v3:
- removed unnecessary int_vref_mv from ad7780_state
Changes in v4:
- removed voltage reading on probe

drivers/staging/iio/adc/ad7780.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index c7cb05cedbbc..52a914360574 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -42,7 +42,6 @@ struct ad7780_state {
struct regulator *reg;
struct gpio_desc *powerdown_gpio;
unsigned int gain;
- u16 int_vref_mv;

struct ad_sigma_delta sd;
};
@@ -165,7 +164,7 @@ static int ad7780_probe(struct spi_device *spi)
{
struct ad7780_state *st;
struct iio_dev *indio_dev;
- int ret, voltage_uv = 0;
+ int ret;

indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
@@ -185,16 +184,10 @@ static int ad7780_probe(struct spi_device *spi)
dev_err(&spi->dev, "Failed to enable specified AVdd supply\n");
return ret;
}
- voltage_uv = regulator_get_voltage(st->reg);

st->chip_info =
&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];

- if (voltage_uv)
- st->int_vref_mv = voltage_uv / 1000;
- else
- dev_warn(&spi->dev, "Reference voltage unspecified\n");
-
spi_set_drvdata(spi, indio_dev);

indio_dev->dev.parent = &spi->dev;
--
2.19.1
\
 
 \ /
  Last update: 2018-11-05 20:16    [W:0.087 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site