lkml.org 
[lkml]   [2018]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 3/6] PCI: layerscape: Add the EP mode support
Date
Add the EP mode support.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
v2:
- Add the SoC specific compatibles.

.../devicetree/bindings/pci/layerscape-pci.txt | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 66df1e8..9c090c7 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,12 +13,15 @@ information.

Required properties:
- compatible: should contain the platform identifier such as:
+ RC mode:
"fsl,ls1021a-pcie", "snps,dw-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
"fsl,ls2088a-pcie"
"fsl,ls1088a-pcie"
"fsl,ls1046a-pcie"
"fsl,ls1012a-pcie"
+ EP mode:
+ "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
--
1.7.1
\
 
 \ /
  Last update: 2018-11-05 09:52    [W:0.098 / U:3.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site