lkml.org 
[lkml]   [2018]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V1 1/4] ARM: dts: imx6sx: Add flexcan stop mode wakeup support
On Tue, Oct 23, 2018 at 05:30:44AM +0000, Joakim Zhang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
>
> Add stop-mode property which is required by stop mode wakeup
> feature.
>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
> arch/arm/boot/dts/imx6sx.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> index 844caa39364f..3f459d6da7fc 100644
> --- a/arch/arm/boot/dts/imx6sx.dtsi
> +++ b/arch/arm/boot/dts/imx6sx.dtsi
> @@ -448,6 +448,7 @@
> clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
> <&clks IMX6SX_CLK_CAN1_SERIAL>;
> clock-names = "ipg", "per";
> + stop-mode = <&gpr 0x10 1 0x10 17>;

Is it supported by upstream? I cannot find this property in ether flexcan
bindings doc or kernel driver.

Shawn

> status = "disabled";
> };
>
> @@ -458,6 +459,7 @@
> clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
> <&clks IMX6SX_CLK_CAN2_SERIAL>;
> clock-names = "ipg", "per";
> + stop-mode = <&gpr 0x10 2 0x10 18>;
> status = "disabled";
> };
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-11-04 08:40    [W:0.086 / U:4.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site