lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression: v4.20-rc4: "SMSC LAN8710/LAN8720: Master/Slave resolution failed"
On Thu, Nov 29, 2018 at 03:42:06PM +0100, jacopo mondi wrote:
> Hello,
> netdev people,
> i.MX6 people,
>
> I'm running an i.MX6Q system, and since v4.20-rc1 the ethernet PHY
> fails to properly startup, preventing me from mounting my NFS rootfs
> (the interfaces gets configured after some minutes, but it's too late
> for NFS).
>
> The complete boot log:
>
> [ 3.000186] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL)
> [ 3.015616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 4.090582] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: Master/Slave resolution failed, maybe conflicting manual settings?

Thanks for reporting this.

I made some changes in link mode handling. Let me check the code i modified.

Andrew

\
 
 \ /
  Last update: 2018-11-29 17:41    [W:0.153 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site