lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/3] clk: tegra: ignore unused vfir clock shared with uartb
On Thu, Nov 01, 2018 at 10:41:52AM +0200, Peter De Schrijver wrote:
> On Thu, Nov 01, 2018 at 02:52:29AM +0100, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> > As UARTB and VFIR share their clock enable bit it is rather unwise for
> > the kernel to turn off the VFIR one should that be unused (and
> > potentially vice versa but so far there anyway is no VFIR driver).
> >
> > Without this patch trying to use UARTB with the regular 8250 driver
> > will freeze as soon as ttyS1 is accessed after boot. Luckily, using the
> > high-speed Tegra serial driver won't exhibit the issue as clocks are
> > dynamically enabled/disabled on every access.
> >
> > This has been reproduced both on Apalis T30 as well as Apalis TK1 but
> > may be an issue on all Tegra UARTB's which share the clock enable with
> > VFIR.
> >
>
> Ah.. the correct fix for this is to initialize the enable_refcnt based on the
> hw state. This is done in 9619dba8325fce098bbc9ee2911d1b0150fec0c9 for
> periph gate clocks, but obviously also applies to normal periph clocks.

Hi Marcel,

were you going to send a new version with the alternative fix as
suggested by Peter?

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-11-28 10:24    [W:0.084 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site