lkml.org 
[lkml]   [2018]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 10/14] regulator: dts: set proper lradc vref on OLinuXino Lime2
    On Tue, Nov 27, 2018 at 05:41:10PM +0800, Chen-Yu Tsai wrote:
    > On Tue, Nov 27, 2018 at 5:37 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
    > >
    > > On Mon, Nov 26, 2018 at 05:27:51PM +0200, Priit Laes wrote:
    > > > From: Olliver Schinagl <oliver@schinagl.nl>
    > > >
    > > > The lradc's analog reference voltage is set to 3.0 volt in the
    > > > hardware. This is more or less set in copper for at least lradc0. Set the
    > > > property in the dts to ensure the lradc is referenced properly.
    > > >
    > > > Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
    > > > Signed-off-by: Priit Laes <plaes@plaes.org>
    > >
    > > I'm not sure why that patch is part of this series, but I applied
    > > it. Thanks!
    >
    > Please help fix up the subject. Should read
    >
    > "ARM: dts: sun7i: set proper lradc vref on OLinuXino Lime2"
    >
    > or
    >
    > "ARM: dts: sun7i: olinoxino-lime2: set proper lradc vref"

    Yes, I've noticed it while applying, and this is already fixed :)

    Thanks for the reminder!
    Maxime

    --
    Maxime Ripard, Bootlin
    Embedded Linux and Kernel engineering
    https://bootlin.com
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2018-11-27 10:48    [W:6.120 / U:1.292 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site