lkml.org 
[lkml]   [2018]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] ARM: dts: sun8i: Add board dts file for t3-cqa3t-bv3.
On Wed, Nov 21, 2018 at 11:43:57PM +0800, Hao Zhang wrote:
> The T3/R40/V40 using the same sdk and config file in allwinner
> sdk, it seem they are the same SOC just with different name, so
> compatible with R40.
>
> The t3-cqa3t-bv3 based on Allwinner T3 SoC, it has various connectors,
> leds, buttons, and sell on:
> https://item.taobao.com/item.htm?spm=2013.1.w4023-4203040713.25.62704cce7UCgLS&id=557154455330
>
> It features:
> - X-Powers AXP221s PMIC connected to i2c0
> - 1/2 GB DDR3 DRAM
> - 8 GB eMMC
> - 2x USB 2.0 hosts
> - 1x USB 2.0 OTG
> - 2 LVDS connectors
> - 24 bit RGB LCD connector
> - HDMI output
> - DVP camera interface (support 500w cmos camera)
> - GPIO connectors
> - 5 TTL uarts and 2 RS232 uarts
> - 1 RS485 connector
> - support i2c capacitive tp and usb infrared tp
> - boot control, reset and user buttons
> - 3.5mm headphone and 3.5mm mic jack
> - 100M RJ45
> - micro SD card slot
> - DC power jack
> - RCT power slot
> - 1 CVBS TVIN
> - 1 CVBS TVOUT
> - 2 customer leds
> - 1 buzzer
> - 1 minipcie
> - I2C output
> - SPI output
> - PCM output
> - wifi and bt connector reserved.
>
> Board info can find here:
> https://github.com/Axl-zhang/Allwinner-V40-T3-R40-manual
>
> Signed-off-by: Hao Zhang <hao5781286@gmail.com>

Applied both patches, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-11-22 09:20    [W:0.041 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site