lkml.org 
[lkml]   [2018]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] regulator: wm8994: Don't use devres for enable GPIOs
From
Date
Hi Mark,

On 2018-11-21 13:19, Mark Brown wrote:
> On Wed, Nov 21, 2018 at 10:26:30AM +0100, Marek Szyprowski wrote:
>
>> from wm8994_ldo_remove(), switched to regulator_register() in
>> wm8994_ldo_probe() and added regulator_unregister() in
>> wm8994_ldo_remove(). This way the warning is gone. If there is any
> I don't understand why you'd need to switch to regulator_register()?

I mixed a few things. This was just a first version of my experiments,
which worked without the warning. In the final solution it was not
needed, see https://lkml.org/lkml/2018/11/21/542

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2018-11-21 13:25    [W:0.039 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site