lkml.org 
[lkml]   [2018]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] thermal: tegra: continue if sensor register fails
From
Date
On 13/11/2018 11:06, Wei Ni wrote:
> Don't bail when a sensor fails to register with the
> thermal zone and allow other sensors to register.
> This allows other sensors to register with thermal
> framework even if one sensor fails registration.

I'm not sure if ignoring the error is really safe. Can you describe the
real situation you want to overcome ? How do you differentiate critical
sensors ?

> Signed-off-by: Wei Ni <wni@nvidia.com>
> ---
> drivers/thermal/tegra/soctherm.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
> index ed28110a3535..a824d2e63af3 100644
> --- a/drivers/thermal/tegra/soctherm.c
> +++ b/drivers/thermal/tegra/soctherm.c
> @@ -1370,9 +1370,9 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
> &tegra_of_thermal_ops);
> if (IS_ERR(z)) {
> err = PTR_ERR(z);
> - dev_err(&pdev->dev, "failed to register sensor: %d\n",
> - err);
> - goto disable_clocks;
> + dev_warn(&pdev->dev, "failed to register sensor %s: %d\n",
> + soc->ttgs[i]->name, err);
> + continue;
> }
>
> zone->tz = z;
> @@ -1434,6 +1434,8 @@ static int __maybe_unused soctherm_resume(struct device *dev)
> struct thermal_zone_device *tz;
>
> tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
> + if (!tz)
> + continue;
> err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
> if (err) {
> dev_err(&pdev->dev,
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2018-11-21 09:56    [W:0.100 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site