lkml.org 
[lkml]   [2018]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/2] PCI: pciehp: Add HXT quirk for Command Completed errata
Date
Hi, Bjorn,
Would you please help to review and pull these two quirk patches to
your branch if there is no problem?

Thanks.
Shunyong.

On 2018/11/7 15:24, Yang, Shunyong wrote:
> The HXT SD4800 PCI controller does not set the Command Completed
> bit unless writes to the Slot Command register change "Control"
> bits.
>
> This patch adds SD4800 to the quirk.
>
> Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
> Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
>
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 7dd443aea5a5..91db67963aea 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -920,3 +920,5 @@ static void quirk_cmd_compl(struct pci_dev *pdev)
> PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
> DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0401,
> PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
> +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_HXT, 0x0401,
> + PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
>

\
 
 \ /
  Last update: 2018-11-19 02:09    [W:0.139 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site