lkml.org 
[lkml]   [2018]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: meson: add the clock inputs for the Meson timer
Date
The Meson Timer IP block has two clock inputs:
- clk81 for using the system clock as timebase
- xtal for a timebase with 1us, 10us, 100us and 1ms resolution

The clocksource driver does not use these yet, but it's still a good
idea to add them as this describes how the hardware actually works
internally.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson.dtsi | 2 +-
arch/arm/boot/dts/meson6.dtsi | 5 +++++
arch/arm/boot/dts/meson8.dtsi | 5 +++++
arch/arm/boot/dts/meson8b.dtsi | 5 +++++
4 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index f0255450bcb2..0839da07a75c 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -197,7 +197,7 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};

- timer@9940 {
+ timer_abcde: timer@9940 {
compatible = "amlogic,meson6-timer";
reg = <0x9940 0x18>;
interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 9b463211339f..ca978ab952cd 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -88,6 +88,11 @@
status = "disabled";
};

+&timer_abcde {
+ clocks = <&xtal>, <&clk81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
clocks = <&xtal>, <&clk81>, <&clk81>;
clock-names = "xtal", "pclk", "baud";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 08c54cf5420a..3be5fbd07997 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -387,6 +387,11 @@
clocks = <&clkc CLKID_CLK81>;
};

+&timer_abcde {
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 46b3564a6536..587a855f872b 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -370,6 +370,11 @@
clock-names = "core", "clkin";
};

+&timer_abcde {
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk";
+};
+
&uart_AO {
compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
--
2.19.1
\
 
 \ /
  Last update: 2018-11-16 21:43    [W:0.065 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site