lkml.org 
[lkml]   [2018]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] ASoC: dt-bindings: add bindings for AK4118 transceiver
On Wed, Nov 14, 2018 at 01:16:42PM +0100, Clément Péron wrote:
> Document the bindings for AK4118 S/PDIF transceiver
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> .../devicetree/bindings/sound/ak4118.txt | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ak4118.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt
> new file mode 100644
> index 000000000000..6e11a2f7404c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ak4118.txt
> @@ -0,0 +1,22 @@
> +AK4118 S/PDIF transceiver
> +
> +This device supports I2C mode.
> +
> +Required properties:
> +
> +- compatible : "asahi-kasei,ak4118"
> +- reg : The I2C address of the device for I2C
> +- reset-gpios: A GPIO specifier for the reset pin
> +- irq-gpios: A GPIO specifier for the IRQ pin

This should use 'interrupts' instead.

> +
> +Example:
> +
> +&i2c {
> + ak4118: ak4118@13 {

spdif@13 ? Node names should be based on the class of device, but
there's not really one defined for this.

> + #sound-dai-cells = <0>;
> + compatible = "asahi-kasei,ak4118";
> + reg = <0x13>;
> + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
> + irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
> + };
> +};
> --
> 2.19.1
>

\
 
 \ /
  Last update: 2018-11-17 16:52    [W:0.109 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site