lkml.org 
[lkml]   [2018]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 0/7] KVM: x86: Allow Qemu/KVM to use PVH entry point
From
Date
On 11/16/2018 2:46 AM, Paolo Bonzini wrote:
> On 17/04/18 01:09, Maran Wilson wrote:
>> For certain applications it is desirable to rapidly boot a KVM virtual
>> machine. In cases where legacy hardware and software support within the
>> guest is not needed, Qemu should be able to boot directly into the
>> uncompressed Linux kernel binary without the need to run firmware.
>>
>> There already exists an ABI to allow this for Xen PVH guests and the ABI
>> is supported by Linux and FreeBSD:
>>
>> https://xenbits.xen.org/docs/unstable/misc/pvh.html
>>
>> This patch series would enable Qemu to use that same entry point for
>> booting KVM guests.
> Hi Maran, what happened to this series (and to the QEMU work)?

Hi Paolo,

Thank you for the reminder. Sorry, I have been wanting to continue this
work for a while now, but our team has been pulled in other directions
and this one ended up getting temporarily pushed down the priority stack.

Let me discuss with my management and get back to you. I do want (and
intend) to support and push this over the finish line.

In the meantime, if there are any folks out there with a specific
business need for getting this done sooner rather than later and are
able to invest a bit of time to collaborate on the remaining Qemu work,
please feel free to ping me offline. We have some preliminary Qemu
patches, but there is some additional work needed before they are ready
wider review.

Thanks,
-Maran

>
> Paolo
>
>> Changes from v6:
>>
>> * Addressed issues caught by the kbuild test robot:
>> - Restored an #include line that had been dropped by mistake (patch 4)
>> - Removed a pair of #include lines that were no longer needed in a
>> common code file and causing problems for certain 32-bit configs
>> (patchs 4 and 7)
>>
>> Changes from v5:
>>
>> * The interface changes to the x86/HVM start info layout have
>> now been accepted into the Xen tree.
>> * Rebase and merge upstream PVH file changes.
>> * (Patch 6) Synced up to the final version of the header file that was
>> acked and pulled into the Xen tree.
>> * (Patch 1) Fixed typo and removed redundant "def_bool n" line.
>>
>> Changes from v4:
>>
>> Note: I've withheld Juergen's earlier "Reviewed-by" tags from patches
>> 1 and 7 since there were minor changes (mostly just addition of
>> CONFIG_KVM_GUEST_PVH as requested) that came afterwards.
>>
>> * Changed subject prefix from RFC to PATCH
>> * Added CONFIG_KVM_GUEST_PVH as suggested
>> * Relocated the PVH common files to
>> arch/x86/platform/pvh/{enlighten.c,head.S}
>> * Realized I also needed to move the objtool override for those files
>> * Updated a few code comments per reviewer feedback
>> * Sent out a patch of the hvm_start_info struct changes against the Xen
>> tree since that is the canonical copy of the header. Discussions on
>> that thread have resulted in some (non-functional) updates to
>> start_info.h (patch 6/7) and those changes are reflected here as well
>> in order to keep the files in sync. The header file has since been
>> ack'ed for the Xen tree by Jan Beulich.
>>
>> Changes from v3:
>>
>> * Implemented Juergen's suggestion for refactoring and moving the PVH
>> code so that CONFIG_XEN is no longer required for booting KVM guests
>> via the PVH entry point.
>> Functionally, nothing has changed from V3 really, but the patches
>> look completely different now because of all the code movement and
>> refactoring. Some of these patches can be combined, but I've left
>> them very small in some cases to make the refactoring and code
>> movement easier to review.
>> My approach for refactoring has been to create a PVH entry layer that
>> still has understanding and knowledge about Xen vs non-Xen guest types
>> so that it can make run time decisions to handle either case, as
>> opposed to going all the way and re-writing it to be a completely
>> hypervisor agnostic and architecturally pure layer that is separate
>> from guest type details. The latter seemed a bit overkill in this
>> situation. And I've handled the complexity of having to support
>> Qemu/KVM boot of kernels compiled with or without CONFIG_XEN via a
>> pair of xen specific __weak routines that can be overridden in kernels
>> that support Xen guests. Importantly, the __weak routines are for
>> xen specific code only (not generic "guest type" specific code) so
>> there is no clashing between xen version of the strong routine and,
>> say, a KVM version of the same routine. But I'm sure there are many
>> ways to skin this cat, so I'm open to alternate suggestions if there
>> is a compelling reason for not using __weak in this situation.
>>
>> Changes from v2:
>>
>> * All structures (including memory map table entries) are padded and
>> aligned to an 8 byte boundary.
>>
>> * Removed the "packed" attributes and made changes to comments as
>> suggested by Jan.
>>
>> Changes from v1:
>>
>> * Adopted Paolo's suggestion for defining a v2 PVH ABI that includes the
>> e820 map instead of using the second module entry to pass the table.
>>
>> * Cleaned things up a bit to reduce the number of xen vs non-xen special
>> cases.
>>
>>
>> Maran Wilson (7):
>> xen/pvh: Split CONFIG_XEN_PVH into CONFIG_PVH and CONFIG_XEN_PVH
>> xen/pvh: Move PVH entry code out of Xen specific tree
>> xen/pvh: Create a new file for Xen specific PVH code
>> xen/pvh: Move Xen specific PVH VM initialization out of common file
>> xen/pvh: Move Xen code for getting mem map via hcall out of common
>> file
>> xen/pvh: Add memory map pointer to hvm_start_info struct
>> KVM: x86: Allow Qemu/KVM to use PVH entry point
>>
>> MAINTAINERS | 1 +
>> arch/x86/Kbuild | 2 +
>> arch/x86/Kconfig | 14 +++
>> arch/x86/kernel/head_64.S | 2 +-
>> arch/x86/platform/pvh/Makefile | 5 +
>> arch/x86/platform/pvh/enlighten.c | 136 ++++++++++++++++++++++++
>> arch/x86/{xen/xen-pvh.S => platform/pvh/head.S} | 0
>> arch/x86/xen/Kconfig | 3 +-
>> arch/x86/xen/Makefile | 2 -
>> arch/x86/xen/enlighten_pvh.c | 93 +++-------------
>> include/xen/interface/hvm/start_info.h | 63 ++++++++++-
>> 11 files changed, 240 insertions(+), 81 deletions(-)
>> create mode 100644 arch/x86/platform/pvh/Makefile
>> create mode 100644 arch/x86/platform/pvh/enlighten.c
>> rename arch/x86/{xen/xen-pvh.S => platform/pvh/head.S} (100%)
>>

\
 
 \ /
  Last update: 2018-11-16 18:19    [W:1.925 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site