lkml.org 
[lkml]   [2018]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 01/10] ARM64: dts: amlogic: Add all CPUs in cooling maps
    Date
    Each CPU can (and does) participate in cooling down the system but the
    DT only captures a handful of them, normally CPU0, in the cooling maps.
    Things work by chance currently as under normal circumstances its the
    first CPU of each cluster which is used by the operating systems to
    probe the cooling devices. But as soon as this CPU ordering changes and
    any other CPU is used to bring up the cooling device, we will start
    seeing failures.

    Also the DT is rather incomplete when we list only one CPU in the
    cooling maps, as the hardware doesn't have any such limitations.

    Update cooling maps to include all devices affected by individual trip
    points.

    Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
    ---
    .../dts/amlogic/meson-gxm-khadas-vim2.dts | 22 ++++++++-----------
    1 file changed, 9 insertions(+), 13 deletions(-)

    diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
    index 313f88f8759e..cfc92d06a28f 100644
    --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
    +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
    @@ -132,19 +132,15 @@

    map1 {
    trip = <&cpu_alert1>;
    - cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
    - };
    -
    - map2 {
    - trip = <&cpu_alert1>;
    - cooling-device =
    - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    - };
    -
    - map3 {
    - trip = <&cpu_alert1>;
    - cooling-device =
    - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    + cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
    + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
    + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    };
    };
    --
    2.19.1.568.g152ad8e3369a
    \
     
     \ /
      Last update: 2018-11-16 11:06    [W:2.236 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site