lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/15] soc: sunxi: sram: Enable EMAC clock access for H3 variant
Date
Just like the A64 and H5, the H3 SoC uses the system control block
to enable the EMAC clock.

Add a variant structure definition for the H3 and use it over the A10
one. This will allow using the H3-specific binding for the syscon node
attached to the EMAC instead of the generic syscon binding.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
drivers/soc/sunxi/sunxi_sram.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
index b4b0f3480bd3..afa86b5506eb 100644
--- a/drivers/soc/sunxi/sunxi_sram.c
+++ b/drivers/soc/sunxi/sunxi_sram.c
@@ -300,6 +300,10 @@ static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = {
/* Nothing special */
};

+static const struct sunxi_sramc_variant sun8i_h3_sramc_variant = {
+ .has_emac_clock = true,
+};
+
static const struct sunxi_sramc_variant sun50i_a64_sramc_variant = {
.has_emac_clock = true,
};
@@ -379,7 +383,7 @@ static const struct of_device_id sunxi_sram_dt_match[] = {
},
{
.compatible = "allwinner,sun8i-h3-system-control",
- .data = &sun4i_a10_sramc_variant,
+ .data = &sun8i_h3_sramc_variant,
},
{
.compatible = "allwinner,sun50i-a64-sram-controller",
--
2.19.1
\
 
 \ /
  Last update: 2018-11-15 15:52    [W:0.185 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site