lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 2/2] perf vendor events: Add JSON metrics for Cascadelake server
    On Wed, Nov 14, 2018 at 01:24:16PM -0800, kan.liang@linux.intel.com wrote:
    > From: Kan Liang <kan.liang@linux.intel.com>
    >
    > Add JSON metrics (based on event list v1) for Cascadelake server

    hum mail server probably crippled the email so it won't apply:

    patching file pmu-events/arch/x86/cascadelakex/cache.json
    patching file pmu-events/arch/x86/cascadelakex/clx-metrics.json
    patching file pmu-events/arch/x86/cascadelakex/floating-point.json
    patching file pmu-events/arch/x86/cascadelakex/frontend.json
    patching file pmu-events/arch/x86/cascadelakex/memory.json
    patching file pmu-events/arch/x86/cascadelakex/other.json
    patching file pmu-events/arch/x86/cascadelakex/pipeline.json
    patch: **** malformed patch at line 29879: ow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",

    I've similar error before and it was because of the 998 chars size
    limit for line.. I guess you could either post it as attachment or
    change the transfer encoding

    jirka

    \
     
     \ /
      Last update: 2018-11-15 14:22    [W:3.658 / U:0.368 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site