lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v1 4/7] clk: meson: clk-pll: add the is_enabled function in the clk_ops
Date
Now that we have a utility function to check whether the PLL is enabled
we can also pass that to our clk_ops to let the common clock framework
know about the status of the hardware clock.
For now this is of limited use since the only common clock framework's
internal "disabled unused clocks" mechanism checks for this. Everything
else still uses the ref-counting (internal to the common clock
framework) when clk_enable is called.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/meson/clk-pll.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index b46cca953f4f..65eeae0989d9 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -309,10 +309,12 @@ const struct clk_ops meson_clk_pll_ops = {
.recalc_rate = meson_clk_pll_recalc_rate,
.round_rate = meson_clk_pll_round_rate,
.set_rate = meson_clk_pll_set_rate,
+ .is_enabled = meson_clk_pll_is_enabled,
.enable = meson_clk_pll_enable,
.disable = meson_clk_pll_disable
};

const struct clk_ops meson_clk_pll_ro_ops = {
.recalc_rate = meson_clk_pll_recalc_rate,
+ .is_enabled = meson_clk_pll_is_enabled,
};
--
2.19.1
\
 
 \ /
  Last update: 2018-11-14 23:59    [W:0.084 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site