lkml.org 
[lkml]   [2018]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v4 04/10] arm64: allwinner: dts: h6: add USB2-related device nodes
Hi,

On Thu, Oct 4, 2018 at 8:30 PM Icenowy Zheng <icenowy@aosc.io> wrote:
>
> Allwinner H6 has two USB2 ports, one OTG and one host-only.
>
> Add device tree nodes related to them.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> ---
> No changes in v4.
>
> Changes in v3:
> - Removed the wrongly introduced usb3phy node.
> - Added Chen-Yu's Review tag.
>
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 81 ++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 040828d2e2c0..3d60af6cb3ae 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -258,6 +258,87 @@
> status = "disabled";
> };
>
> + usb2otg: usb@5100000 {
> + compatible = "allwinner,sun8i-a33-musb";

I added an SoC-specific compatible: "allwinner,sun50i-h6-musb".

I'm also curious as to whether the MUSB controller was tested or not,
since Allwinner now has EHCI/OHCI host pairs for host mode, and the Pine H64
only does host mode.

> + reg = <0x05100000 0x0400>;
> + clocks = <&ccu CLK_BUS_OTG>;
> + resets = <&ccu RST_BUS_OTG>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "mc";
> + phys = <&usb2phy 0>;
> + phy-names = "usb";
> + extcon = <&usb2phy 0>;
> + status = "disabled";
> + };
> +
> + usb2phy: phy@5100400 {
> + compatible = "allwinner,sun50i-h6-usb-phy";
> + reg = <0x05100400 0x14>,
> + <0x05101800 0x4>,
> + <0x05311800 0x4>;
> + reg-names = "phy_ctrl",
> + "pmu0",
> + "pmu3";
> + clocks = <&ccu CLK_USB_PHY0>,
> + <&ccu CLK_USB_PHY3>;
> + clock-names = "usb0_phy",
> + "usb3_phy";
> + resets = <&ccu RST_USB_PHY0>,
> + <&ccu RST_USB_PHY3>;
> + reset-names = "usb0_reset",
> + "usb3_reset";
> + status = "disabled";
> + #phy-cells = <1>;
> + };
> +
> + ehci0: usb@5101000 {
> + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
> + reg = <0x05101000 0x100>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI0>,
> + <&ccu CLK_BUS_EHCI0>,
> + <&ccu CLK_USB_OHCI0>;
> + resets = <&ccu RST_BUS_OHCI0>,
> + <&ccu RST_BUS_EHCI0>;
> + status = "disabled";
> + };
> +
> + ohci0: usb@5101400 {
> + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
> + reg = <0x05101400 0x100>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI0>,
> + <&ccu CLK_USB_OHCI0>;
> + resets = <&ccu RST_BUS_OHCI0>;
> + status = "disabled";
> + };
> +
> + ehci3: usb@5311000 {
> + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
> + reg = <0x05311000 0x100>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI3>,
> + <&ccu CLK_BUS_EHCI3>,
> + <&ccu CLK_USB_OHCI3>;
> + resets = <&ccu RST_BUS_OHCI3>,
> + <&ccu RST_BUS_EHCI3>;
> + phys = <&usb2phy 3>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + ohci3: usb@5311400 {
> + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
> + reg = <0x05311400 0x100>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI3>,
> + <&ccu CLK_USB_OHCI3>;
> + resets = <&ccu RST_BUS_OHCI3>;
> + phys = <&usb2phy 3>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +

This didn't apply cleanly due to the new HDMI nodes. I fixed it up locally.

ChenYu

> r_ccu: clock@7010000 {
> compatible = "allwinner,sun50i-h6-r-ccu";
> reg = <0x07010000 0x400>;
> --
> 2.18.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

\
 
 \ /
  Last update: 2018-11-14 11:22    [W:0.220 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site