Messages in this thread | | | Subject | Re: [PATCH] usb: core: Fix hub port connection events lost | From | Mathias Nyman <> | Date | Tue, 13 Nov 2018 15:55:33 +0200 |
| |
On 13.11.2018 15:40, Dennis Wassenberg wrote: > This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset > only if a device is was attached to the hub port before resetting the hub port. > > Using a Lenovo T480s attached to the ultra dock it was not possible to detect > some usb-c devices at the dock usb-c ports because the hub_port_reset code > will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. > Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the > actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. > This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the > new device was attached such that it was not detected. > > This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is > currently no device attached to the port before the hub port reset. > This will avoid clearing the connection bit for new attached devices. > > Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> > --- > drivers/usb/core/hub.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index c6077d582d29..2731fad6f659 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -2849,7 +2849,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, > USB_PORT_FEAT_C_BH_PORT_RESET); > usb_clear_port_feature(hub->hdev, port1, > USB_PORT_FEAT_C_PORT_LINK_STATE); > - usb_clear_port_feature(hub->hdev, port1, > + > + if (udev) > + usb_clear_port_feature(hub->hdev, port1, > USB_PORT_FEAT_C_CONNECTION); > > /* >
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
| |