lkml.org 
[lkml]   [2018]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
From
Date
Hi Boris,

On 12/11/18 09:17, Boris Brezillon wrote:
> On Thu, 8 Nov 2018 17:14:10 +0000
> Vitor soares <vitor.soares@synopsys.com> wrote:
>
>> Document Synopsys DesignWare I3C master module
>>
>> Signed-off-by: Vitor soares <soares@synopsys.com>
>> ---
>> Changes in v3:
>> - Remove dummy characters
>>
>> Changes in v2:
>> - Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
>> - Add controller version on compatible string
>>
>> .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
>> 1 file changed, 42 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> new file mode 100644
>> index 0000000..b930c09
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> @@ -0,0 +1,42 @@
>> +Bindings for Synopsys DesignWare I3C master block
>> +=================================================
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: shall be "snps,dw-i3c-master-1.00a"
>> +- clocks: shall reference the core_clk
> Are you sure this IP only requires only one clock? If you're unsure,
> you'd better have a clock-names prop.
Yes, the controller only has this clock dependency to configure the SCL.
>
>> +- interrupts: the interrupt line connected to this I3C master
>> +- reg: Offset and length of I3C master registers
>> +
>> +Mandatory properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- #address-cells: shall be set to 3
>> +- #size-cells: shall be set to 0
>> +
>> +Optional properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- i2c-scl-hz
>> +- i3c-scl-hz
>> +
>> +I3C device connected on the bus follow the generic description (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
>> +
>> +Example:
>> +
>> + i3c-master@2000 {
>> + compatible = "snps,dw-i3c-master-1.00a";
>> + #address-cells = <3>;
>> + #size-cells = <0>;
>> + reg = <0x02000 0x1000>;
>> + interrupts = <0>;
>> + clocks = <&i3cclk>;
>> +
>> + eeprom@57{
>> + compatible = "atmel,24c01";
>> + reg = < 0x57 0x0 0x10>;
> ^ remove this white space.
>
>> + pagesize = <0x8>;
>> + };
>> + };
>> +

Best regards,

Vitor Soares

\
 
 \ /
  Last update: 2018-11-13 12:12    [W:0.083 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site