lkml.org 
[lkml]   [2018]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 04/24] dt-bindings: leds: Add function and color properties
From
Date
Dan,

On 11/08/2018 10:08 PM, Dan Murphy wrote:
> Jacek
>
> On 11/08/2018 02:47 PM, Jacek Anaszewski wrote:
>> Dan,
>>
>> On 11/08/2018 07:00 PM, Dan Murphy wrote:
>>> Jacek
>>>
>>> On 11/06/2018 04:07 PM, Jacek Anaszewski wrote:
>>>> Introduce dedicated properties for conveying information about
>>>> LED function and color. Mark old "label" property as deprecated.
>>>>
>>>> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
>>>> Cc: Baolin Wang <baolin.wang@linaro.org>
>>>> Cc: Daniel Mack <daniel@zonque.org>
>>>> Cc: Dan Murphy <dmurphy@ti.com>
>>>> Cc: Linus Walleij <linus.walleij@linaro.org>
>>>> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
>>>> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
>>>> Cc: Simon Shields <simon@lineageos.org>
>>>> Cc: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
>>>> ---
>>>> Documentation/devicetree/bindings/leds/common.txt | 52 +++++++++++++++++++----
>>>> 1 file changed, 44 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
>>>> index aa13998..3efc826 100644
>>>> --- a/Documentation/devicetree/bindings/leds/common.txt
>>>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>>>> @@ -10,14 +10,20 @@ can influence the way of the LED device initialization, the LED components
>>>> have to be tightly coupled with the LED device binding. They are represented
>>>> by child nodes of the parent LED device binding.
>>>>
>>>> +
>>>> Optional properties for child nodes:
>>>> - led-sources : List of device current outputs the LED is connected to. The
>>>> outputs are identified by the numbers that must be defined
>>>> in the LED device binding documentation.
>>>> +- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions
>>>> + from the header include/dt-bindings/leds/functions.h.
>>>> + If there is no matching LED_FUNCTION available, add a new one.
>>>> +- color : Color of the LED.
>>>
>>> Should we define the colors too? There are only really 4. Red, green, blue and white.
>>>
>>> Generally varying colors are created base on the primary colors. Even the amber color
>>
>> No problem, I can add LED colors. However, I don't quite follow how
>> the mix of base color strings would give "amber" ? :-)
>>
>
> Amber or yellow. Red and green with a hint of blue or no blue depending on how dark you want it.
>
> You don't always have to turn the LED on full to mix. Sometimes lowering the level of the stronger colors like red
> and upping weaker colors like green you can different color

That's obvious. I was rather curious what you had on mind by mentioning
four colors (red, green, blue and white) in the context of "amber".
Just to remind: we're still talking about LED names, not the values.

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2018-11-09 21:01    [W:0.172 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site