lkml.org 
[lkml]   [2018]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 02/11] dt-bindings: phy: add cpsw port interface mode selection phy bindings
* Grygorii Strashko <grygorii.strashko@ti.com> [181009 20:10]:
>
>
> On 10/09/2018 09:40 AM, Tony Lindgren wrote:
> > * Grygorii Strashko <grygorii.strashko@ti.com> [181008 23:54]:
> >> +Examples:
> >> + phy_gmii_sel: phy-gmii-sel {
> >> + compatible = "ti,am3352-phy-gmii-sel";
> >> + syscon-scm = <&scm_conf>;
> >> + #phy-cells = <2>;
> >> + };
> >
> > Now that this driver can live in it's proper place in the
>
> right
>
> > dts, you may want to consider just using standard reg
> > property for it instead of the syscon-scm. And also get
> > rid of the syscon reads and writes.
>
> Could you help clarify how to get syscon in this case?
> syscon_node_to_regmap(dev->parent->of_node)?

Hmm I don't think you need syscon at all now. You can just
ioremap the register(s) and use readl/writel and that's it.
Or use regmap without syscon if you prefer that.

The ioremap in this case should be hitting cached ranges
anyways, so no extra overhead there.

> Also, there are could be more then one gmii_sel registers in SCM in the future,
> so I hidden offsets in of_match data.
> As result, "reg" not needed at all now.

But then you have to patch driver for various SoCs
instead of just configuring the standard reg property
in the dts file :)

Regards,

Tony

\
 
 \ /
  Last update: 2018-10-09 22:31    [W:0.063 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site