lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices
From
Date
Hi Arun, Bjorn,

On 10/08/2018 08:38 AM, Arun Kumar Neelakantam wrote:
> Glink transport support signals to exchange state notification between
> local and remote side clients. Adding support to send/receive the signal
> command and notify the clients through callback and POLL notification.

Please correct me if i'm wrong...My concern here is that this patchset
implements a rpmsg service in the rpmsg core. I would separate this from
the rpmsg core, as this is not part of the rpmsg protocol but seems
linked to the serial protocol itself.
Could it be implemented in rpmsg_char, using a dedicated channel...?

Regards
Arnaud

>
> Changes since v1:
> - Split the patches as per functional areas like core, char, glink
> - Add set, clear mask for TIOCMSET
> - Merge the char signal callback and POLLPRI patches
>
> Changes since v2:
> - Modify the rpmsg_get_signals function prototype
>
> Changes since v3:
> - Correct the TICOMGET case handling as per new rpmsg_get_signals prototype
> - Update the rpmsg_get_signals function header
>
> Arun Kumar Neelakantam (4):
> rpmsg: core: Add signal API support
> rpmsg: glink: Add support to handle signals command
> rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
> rpmsg: char: Add signal callback and POLLPRI support
>
> drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
> drivers/rpmsg/rpmsg_char.c | 74 +++++++++++++++++++++-
> drivers/rpmsg/rpmsg_core.c | 41 +++++++++++++
> drivers/rpmsg/rpmsg_internal.h | 5 ++
> include/linux/rpmsg.h | 26 ++++++++
> 5 files changed, 269 insertions(+), 3 deletions(-)
>

\
 
 \ /
  Last update: 2018-10-08 15:09    [W:0.057 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site