lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] clk: qcom: gcc: Add global clock controller driver for QCS404
On 07-10-18, 19:38, Stephen Boyd wrote:
> Quoting Vinod (2018-10-02 23:21:03)
> > Hi Stephen,
> >
> > Thanks for the comments,
> >
> > On 01-10-18, 10:19, Stephen Boyd wrote:
> > > Quoting Vinod Koul (2018-09-21 11:59:36)
> > > > From: Shefali Jain <shefjain@codeaurora.org>
> > > >
> > > > Add the clocks supported in global clock controller which clock the
> > > > peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks
> > > > to the clock framework for the clients to be able to request for them.
> > > >
> > > > Signed-off-by: Shefali Jain <shefjain@codeaurora.org>
> > > > Signed-off-by: Taniya Das <tdas@codeaurora.org>
> > > > Co-developed-by: Taniya Das <tdas@codeaurora.org>
> > > > Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
> > > > [rebase and tidyup for upstream]
> > >
> > > Who did the tidying?
> >
> > both of us :)
>
> OK, please add the username of both people per the kernel sign off
> standards.
>
> > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > > Signed-off-by: Vinod Koul <vkoul@kernel.org>

Sorry not sure I understand, Bjorn and me did cleanup and we signed-off
per process, did I miss something?

> > > > +#include <linux/kernel.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/clk.h>
> > >
> > > Please don't include this.
> >
> > OK will check if this is required, any reason for not including this?
>
> So we can easily split clk consumers and clk providers.

That was my thought, thanks for confirming :)

> > > > +static struct clk_branch gcc_pwm1_xo512_clk = {
> > > > + .halt_reg = 0x49004,
> > > > + .halt_check = BRANCH_HALT,
> > > > + .clkr = {
> > > > + .enable_reg = 0x49004,
> > > > + .enable_mask = BIT(0),
> > > > + .hw.init = &(struct clk_init_data){
> > > > + .name = "gcc_pwm1_xo512_clk",
> > > > + .ops = &clk_branch2_ops,
> > >
> > > Do these pwm clks have a parent clk of the XO?
> >
> > Yes they do
>
> Cool, we should add them or add a comment explaining why they don't have
> parents listed here.

ok

> > > > + [GCC_USB_HS_PHY_CFG_AHB_CLK] = &gcc_usb_hs_phy_cfg_ahb_clk.clkr,
> > > > + [GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
> > > > + [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
> > > > + [GP1_CLK_SRC] = &gp1_clk_src.clkr,
> > >
> > > Why are some of these missing GCC_ prefix?
> >
> > will add..
>
> Thanks!

Btw Taniya also commented on this, do you want this as GCC_ or as per hw
documentation?

> > > > + clk_prepare_enable(apss_ahb_clk_src.clkr.hw.clk);
> > > > + clk_prepare_enable(gpll0_ao_out_main.clkr.hw.clk);
> > >
> > > And these should be marked as critical clocks.
> >
> > Okay and how do we go about doing that?
>
> You mark the clk flags with CLK_IS_CRITICAL.

Thanks will do.


--
~Vinod

\
 
 \ /
  Last update: 2018-10-08 05:53    [W:0.061 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site