lkml.org 
[lkml]   [2018]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] seco-cec: add Consumer-IR support
On Fri, Oct 05, 2018 at 07:33:59PM +0200, ektor5 wrote:
> From: Ettore Chimenti <ek5.chimenti@gmail.com>
>
> Introduce support for Consumer-IR into seco-cec driver, as it shares the
> same interrupt for receiving messages.
> The device decodes RC5 signals only, defaults to hauppauge mapping.
> It will spawn an input interface using the RC framework (like CEC
> device).
>
> Signed-off-by: Ettore Chimenti <ek5.chimenti@gmail.com>

Looks great, thanks!

Reviewed-by: Sean Young <sean@mess.org>

> ---
> drivers/media/platform/Kconfig | 10 ++
> drivers/media/platform/seco-cec/seco-cec.c | 125 ++++++++++++++++++++-
> drivers/media/platform/seco-cec/seco-cec.h | 11 ++
> 3 files changed, 145 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 51cd1fd005e3..e6b45da2af6d 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -625,6 +625,16 @@ config VIDEO_SECO_CEC
> CEC bus is present in the HDMI connector and enables communication
> between compatible devices.
>
> +config VIDEO_SECO_RC
> + bool "SECO Boards IR RC5 support"
> + depends on VIDEO_SECO_CEC
> + select RC_CORE
> + help
> + If you say yes here you will get support for the
> + SECO Boards Consumer-IR in seco-cec driver.
> + The embedded controller supports RC5 protocol only, default mapping
> + is set to rc-hauppauge.
> +
> endif #CEC_PLATFORM_DRIVERS
>
> menuconfig SDR_PLATFORM_DRIVERS
> diff --git a/drivers/media/platform/seco-cec/seco-cec.c b/drivers/media/platform/seco-cec/seco-cec.c
> index 990e88f979a2..6ae42fc855ef 100644
> --- a/drivers/media/platform/seco-cec/seco-cec.c
> +++ b/drivers/media/platform/seco-cec/seco-cec.c
> @@ -26,6 +26,8 @@ struct secocec_data {
> struct platform_device *pdev;
> struct cec_adapter *cec_adap;
> struct cec_notifier *notifier;
> + struct rc_dev *ir;
> + char ir_input_phys[32];
> int irq;
> };
>
> @@ -371,6 +373,114 @@ struct cec_adap_ops secocec_cec_adap_ops = {
> .adap_transmit = secocec_adap_transmit,
> };
>
> +#ifdef CONFIG_VIDEO_SECO_RC
> +static int secocec_ir_probe(void *priv)
> +{
> + struct secocec_data *cec = priv;
> + struct device *dev = cec->dev;
> + int status;
> + u16 val;
> +
> + /* Prepare the RC input device */
> + cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
> + if (!cec->ir)
> + return -ENOMEM;
> +
> + snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
> + "%s/input0", dev_name(dev));
> +
> + cec->ir->device_name = dev_name(dev);
> + cec->ir->input_phys = cec->ir_input_phys;
> + cec->ir->input_id.bustype = BUS_HOST;
> + cec->ir->input_id.vendor = 0;
> + cec->ir->input_id.product = 0;
> + cec->ir->input_id.version = 1;
> + cec->ir->driver_name = SECOCEC_DEV_NAME;
> + cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
> + cec->ir->priv = cec;
> + cec->ir->map_name = RC_MAP_HAUPPAUGE;
> + cec->ir->timeout = MS_TO_NS(100);
> +
> + /* Clear the status register */
> + status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
> + if (status != 0)
> + goto err;
> +
> + status = smb_wr16(SECOCEC_STATUS_REG_1, val);
> + if (status != 0)
> + goto err;
> +
> + /* Enable the interrupts */
> + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
> + if (status != 0)
> + goto err;
> +
> + status = smb_wr16(SECOCEC_ENABLE_REG_1,
> + val | SECOCEC_ENABLE_REG_1_IR);
> + if (status != 0)
> + goto err;
> +
> + dev_dbg(dev, "IR enabled");
> +
> + status = devm_rc_register_device(dev, cec->ir);
> +
> + if (status) {
> + dev_err(dev, "Failed to prepare input device");
> + cec->ir = NULL;
> + goto err;
> + }
> +
> + return 0;
> +
> +err:
> + smb_rd16(SECOCEC_ENABLE_REG_1, &val);
> +
> + smb_wr16(SECOCEC_ENABLE_REG_1,
> + val & ~SECOCEC_ENABLE_REG_1_IR);
> +
> + dev_dbg(dev, "IR disabled");
> + return status;
> +}
> +
> +static int secocec_ir_rx(struct secocec_data *priv)
> +{
> + struct secocec_data *cec = priv;
> + struct device *dev = cec->dev;
> + u16 val, status, key, addr, toggle;
> +
> + if (!cec->ir)
> + return -ENODEV;
> +
> + status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
> + if (status != 0)
> + goto err;
> +
> + key = val & SECOCEC_IR_COMMAND_MASK;
> + addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
> + toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
> +
> + rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
> +
> + dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
> + addr, toggle);
> +
> + return 0;
> +
> +err:
> + dev_err(dev, "IR Receive message failed (%d)", status);
> + return -EIO;
> +}
> +#else
> +static void secocec_ir_rx(struct secocec_data *priv)
> +{
> +}
> +
> +static int secocec_ir_probe(void *priv)
> +{
> + return 0;
> +}
> +#endif
> +
> static irqreturn_t secocec_irq_handler(int irq, void *priv)
> {
> struct secocec_data *cec = priv;
> @@ -406,7 +516,8 @@ static irqreturn_t secocec_irq_handler(int irq, void *priv)
> if (status_val & SECOCEC_STATUS_REG_1_IR) {
> dev_dbg(dev, "IR RC5 Interrupt Caught");
> val |= SECOCEC_STATUS_REG_1_IR;
> - /* TODO IRDA RX */
> +
> + secocec_ir_rx(cec);
> }
>
> /* Reset status register */
> @@ -576,6 +687,10 @@ static int secocec_probe(struct platform_device *pdev)
> if (secocec->notifier)
> cec_register_cec_notifier(secocec->cec_adap, secocec->notifier);
>
> + ret = secocec_ir_probe(secocec);
> + if (ret)
> + goto err_delete_adapter;
> +
> platform_set_drvdata(pdev, secocec);
>
> dev_dbg(dev, "Device registered");
> @@ -593,7 +708,15 @@ static int secocec_probe(struct platform_device *pdev)
> static int secocec_remove(struct platform_device *pdev)
> {
> struct secocec_data *secocec = platform_get_drvdata(pdev);
> + u16 val;
> +
> + if (secocec->ir) {
> + smb_rd16(SECOCEC_ENABLE_REG_1, &val);
>
> + smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
> +
> + dev_dbg(&pdev->dev, "IR disabled");
> + }
> cec_unregister_adapter(secocec->cec_adap);
>
> if (secocec->notifier)
> diff --git a/drivers/media/platform/seco-cec/seco-cec.h b/drivers/media/platform/seco-cec/seco-cec.h
> index 93020900935e..3f1aad89b073 100644
> --- a/drivers/media/platform/seco-cec/seco-cec.h
> +++ b/drivers/media/platform/seco-cec/seco-cec.h
> @@ -99,6 +99,17 @@
>
> #define SECOCEC_IR_READ_DATA 0x3e
>
> +/*
> + * IR
> + */
> +
> +#define SECOCEC_IR_COMMAND_MASK 0x007F
> +#define SECOCEC_IR_COMMAND_SHL 0
> +#define SECOCEC_IR_ADDRESS_MASK 0x1F00
> +#define SECOCEC_IR_ADDRESS_SHL 7
> +#define SECOCEC_IR_TOGGLE_MASK 0x8000
> +#define SECOCEC_IR_TOGGLE_SHL 15
> +
> /*
> * Enabling register
> */
> --
> 2.18.0

\
 
 \ /
  Last update: 2018-10-06 11:43    [W:0.063 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site