lkml.org 
[lkml]   [2018]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v7 17/28] zinc: Poly1305 MIPS32r2 and MIPS64 implementations
Date
This MIPS32r2 implementation comes from René van Dorst and me and
results in a nice speedup on the usual OpenWRT targets. The MIPS64
implementation from Andy Polyakov ported here results in a nice speedup
on commodity Octeon hardware, and has been modified slightly from the
original:

- The function names have been renamed to fit kernel conventions.
- A comment has been added.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Co-developed-by: René van Dorst <opensource@vdorst.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Samuel Neves <sneves@dei.uc.pt>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-crypto@vger.kernel.org
---
lib/zinc/Makefile | 3 +
lib/zinc/poly1305/poly1305-mips-glue.c | 37 ++
lib/zinc/poly1305/poly1305-mips.S | 407 ++++++++++++++++++
...-mips64-cryptogams.S => poly1305-mips64.S} | 80 ++--
lib/zinc/poly1305/poly1305.c | 2 +
5 files changed, 500 insertions(+), 29 deletions(-)
create mode 100644 lib/zinc/poly1305/poly1305-mips-glue.c
create mode 100644 lib/zinc/poly1305/poly1305-mips.S
rename lib/zinc/poly1305/{poly1305-mips64-cryptogams.S => poly1305-mips64.S} (75%)

diff --git a/lib/zinc/Makefile b/lib/zinc/Makefile
index c09fd3de60f9..5c4b1d51cb03 100644
--- a/lib/zinc/Makefile
+++ b/lib/zinc/Makefile
@@ -14,4 +14,7 @@ zinc_poly1305-y := poly1305/poly1305.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_X86_64) += poly1305/poly1305-x86_64.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM) += poly1305/poly1305-arm.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM64) += poly1305/poly1305-arm64.o
+zinc_poly1305-$(CONFIG_ZINC_ARCH_MIPS) += poly1305/poly1305-mips.o
+AFLAGS_poly1305-mips.o += -O2 # This is required to fill the branch delay slots
+zinc_poly1305-$(CONFIG_ZINC_ARCH_MIPS64) += poly1305/poly1305-mips64.o
obj-$(CONFIG_ZINC_POLY1305) += zinc_poly1305.o
diff --git a/lib/zinc/poly1305/poly1305-mips-glue.c b/lib/zinc/poly1305/poly1305-mips-glue.c
new file mode 100644
index 000000000000..1eba9512a05c
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips-glue.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+asmlinkage void poly1305_init_mips(void *ctx, const u8 key[16]);
+asmlinkage void poly1305_blocks_mips(void *ctx, const u8 *inp, const size_t len,
+ const u32 padbit);
+asmlinkage void poly1305_emit_mips(void *ctx, u8 mac[16], const u32 nonce[4]);
+
+static bool *const poly1305_nobs[] __initconst = { };
+static void __init poly1305_fpu_init(void)
+{
+}
+
+static inline bool poly1305_init_arch(void *ctx,
+ const u8 key[POLY1305_KEY_SIZE])
+{
+ poly1305_init_mips(ctx, key);
+ return true;
+}
+
+static inline bool poly1305_blocks_arch(void *ctx, const u8 *inp,
+ size_t len, const u32 padbit,
+ simd_context_t *simd_context)
+{
+ poly1305_blocks_mips(ctx, inp, len, padbit);
+ return true;
+}
+
+static inline bool poly1305_emit_arch(void *ctx, u8 mac[POLY1305_MAC_SIZE],
+ const u32 nonce[4],
+ simd_context_t *simd_context)
+{
+ poly1305_emit_mips(ctx, mac, nonce);
+ return true;
+}
diff --git a/lib/zinc/poly1305/poly1305-mips.S b/lib/zinc/poly1305/poly1305-mips.S
new file mode 100644
index 000000000000..4d695eef1091
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips.S
@@ -0,0 +1,407 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2016-2018 René van Dorst <opensource@vdorst.com> All Rights Reserved.
+ * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define MSB 0
+#define LSB 3
+#else
+#define MSB 3
+#define LSB 0
+#endif
+
+#define POLY1305_BLOCK_SIZE 16
+.text
+#define H0 $t0
+#define H1 $t1
+#define H2 $t2
+#define H3 $t3
+#define H4 $t4
+
+#define R0 $t5
+#define R1 $t6
+#define R2 $t7
+#define R3 $t8
+
+#define O0 $s0
+#define O1 $s4
+#define O2 $v1
+#define O3 $t9
+#define O4 $s5
+
+#define S1 $s1
+#define S2 $s2
+#define S3 $s3
+
+#define SC $at
+#define CA $v0
+
+/* Input arguments */
+#define poly $a0
+#define src $a1
+#define srclen $a2
+#define hibit $a3
+
+/* Location in the opaque buffer
+ * R[0..3], CA, H[0..4]
+ */
+#define PTR_POLY1305_R(n) ( 0 + (n*4)) ## ($a0)
+#define PTR_POLY1305_CA (16 ) ## ($a0)
+#define PTR_POLY1305_H(n) (20 + (n*4)) ## ($a0)
+
+#define POLY1305_BLOCK_SIZE 16
+#define POLY1305_STACK_SIZE 32
+
+.set noat
+.align 4
+.globl poly1305_blocks_mips
+.ent poly1305_blocks_mips
+poly1305_blocks_mips:
+ .frame $sp, POLY1305_STACK_SIZE, $ra
+ /* srclen &= 0xFFFFFFF0 */
+ ins srclen, $zero, 0, 4
+
+ addiu $sp, -(POLY1305_STACK_SIZE)
+
+ /* check srclen >= 16 bytes */
+ beqz srclen, .Lpoly1305_blocks_mips_end
+
+ /* Calculate last round based on src address pointer.
+ * last round src ptr (srclen) = src + (srclen & 0xFFFFFFF0)
+ */
+ addu srclen, src
+
+ lw R0, PTR_POLY1305_R(0)
+ lw R1, PTR_POLY1305_R(1)
+ lw R2, PTR_POLY1305_R(2)
+ lw R3, PTR_POLY1305_R(3)
+
+ /* store the used save registers. */
+ sw $s0, 0($sp)
+ sw $s1, 4($sp)
+ sw $s2, 8($sp)
+ sw $s3, 12($sp)
+ sw $s4, 16($sp)
+ sw $s5, 20($sp)
+
+ /* load Hx and Carry */
+ lw CA, PTR_POLY1305_CA
+ lw H0, PTR_POLY1305_H(0)
+ lw H1, PTR_POLY1305_H(1)
+ lw H2, PTR_POLY1305_H(2)
+ lw H3, PTR_POLY1305_H(3)
+ lw H4, PTR_POLY1305_H(4)
+
+ /* Sx = Rx + (Rx >> 2) */
+ srl S1, R1, 2
+ srl S2, R2, 2
+ srl S3, R3, 2
+ addu S1, R1
+ addu S2, R2
+ addu S3, R3
+
+ addiu SC, $zero, 1
+
+.Lpoly1305_loop:
+ lwl O0, 0+MSB(src)
+ lwl O1, 4+MSB(src)
+ lwl O2, 8+MSB(src)
+ lwl O3,12+MSB(src)
+ lwr O0, 0+LSB(src)
+ lwr O1, 4+LSB(src)
+ lwr O2, 8+LSB(src)
+ lwr O3,12+LSB(src)
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ wsbh O0
+ wsbh O1
+ wsbh O2
+ wsbh O3
+ rotr O0, 16
+ rotr O1, 16
+ rotr O2, 16
+ rotr O3, 16
+#endif
+
+ /* h0 = (u32)(d0 = (u64)h0 + inp[0] + c 'Carry_previous cycle'); */
+ addu H0, CA
+ sltu CA, H0, CA
+ addu O0, H0
+ sltu H0, O0, H0
+ addu CA, H0
+
+ /* h1 = (u32)(d1 = (u64)h1 + (d0 >> 32) + inp[4]); */
+ addu H1, CA
+ sltu CA, H1, CA
+ addu O1, H1
+ sltu H1, O1, H1
+ addu CA, H1
+
+ /* h2 = (u32)(d2 = (u64)h2 + (d1 >> 32) + inp[8]); */
+ addu H2, CA
+ sltu CA, H2, CA
+ addu O2, H2
+ sltu H2, O2, H2
+ addu CA, H2
+
+ /* h3 = (u32)(d3 = (u64)h3 + (d2 >> 32) + inp[12]); */
+ addu H3, CA
+ sltu CA, H3, CA
+ addu O3, H3
+ sltu H3, O3, H3
+ addu CA, H3
+
+ /* h4 += (u32)(d3 >> 32) + padbit; */
+ addu H4, hibit
+ addu O4, H4, CA
+
+ /* D0 */
+ multu O0, R0
+ maddu O1, S3
+ maddu O2, S2
+ maddu O3, S1
+ mfhi CA
+ mflo H0
+
+ /* D1 */
+ multu O0, R1
+ maddu O1, R0
+ maddu O2, S3
+ maddu O3, S2
+ maddu O4, S1
+ maddu CA, SC
+ mfhi CA
+ mflo H1
+
+ /* D2 */
+ multu O0, R2
+ maddu O1, R1
+ maddu O2, R0
+ maddu O3, S3
+ maddu O4, S2
+ maddu CA, SC
+ mfhi CA
+ mflo H2
+
+ /* D4 */
+ mul H4, O4, R0
+
+ /* D3 */
+ multu O0, R3
+ maddu O1, R2
+ maddu O2, R1
+ maddu O3, R0
+ maddu O4, S3
+ maddu CA, SC
+ mfhi CA
+ mflo H3
+
+ addiu src, POLY1305_BLOCK_SIZE
+
+ /* h4 += (u32)(d3 >> 32); */
+ addu O4, H4, CA
+ /* h4 &= 3 */
+ andi H4, O4, 3
+ /* c = (h4 >> 2) + (h4 & ~3U); */
+ srl CA, O4, 2
+ ins O4, $zero, 0, 2
+
+ addu CA, O4
+
+ /* able to do a 16 byte block. */
+ bne src, srclen, .Lpoly1305_loop
+
+ /* restore the used save registers. */
+ lw $s0, 0($sp)
+ lw $s1, 4($sp)
+ lw $s2, 8($sp)
+ lw $s3, 12($sp)
+ lw $s4, 16($sp)
+ lw $s5, 20($sp)
+
+ /* store Hx and Carry */
+ sw CA, PTR_POLY1305_CA
+ sw H0, PTR_POLY1305_H(0)
+ sw H1, PTR_POLY1305_H(1)
+ sw H2, PTR_POLY1305_H(2)
+ sw H3, PTR_POLY1305_H(3)
+ sw H4, PTR_POLY1305_H(4)
+
+.Lpoly1305_blocks_mips_end:
+ addiu $sp, POLY1305_STACK_SIZE
+
+ /* Jump Back */
+ jr $ra
+.end poly1305_blocks_mips
+.set at
+
+/* Input arguments CTX=$a0, MAC=$a1, NONCE=$a2 */
+#define MAC $a1
+#define NONCE $a2
+
+#define G0 $t5
+#define G1 $t6
+#define G2 $t7
+#define G3 $t8
+#define G4 $t9
+
+.set noat
+.align 4
+.globl poly1305_emit_mips
+.ent poly1305_emit_mips
+poly1305_emit_mips:
+ /* load Hx and Carry */
+ lw CA, PTR_POLY1305_CA
+ lw H0, PTR_POLY1305_H(0)
+ lw H1, PTR_POLY1305_H(1)
+ lw H2, PTR_POLY1305_H(2)
+ lw H3, PTR_POLY1305_H(3)
+ lw H4, PTR_POLY1305_H(4)
+
+ /* Add left over carry */
+ addu H0, CA
+ sltu CA, H0, CA
+ addu H1, CA
+ sltu CA, H1, CA
+ addu H2, CA
+ sltu CA, H2, CA
+ addu H3, CA
+ sltu CA, H3, CA
+ addu H4, CA
+
+ /* compare to modulus by computing h + -p */
+ addiu G0, H0, 5
+ sltu CA, G0, H0
+ addu G1, H1, CA
+ sltu CA, G1, H1
+ addu G2, H2, CA
+ sltu CA, G2, H2
+ addu G3, H3, CA
+ sltu CA, G3, H3
+ addu G4, H4, CA
+
+ srl SC, G4, 2
+
+ /* if there was carry into 131st bit, h3:h0 = g3:g0 */
+ movn H0, G0, SC
+ movn H1, G1, SC
+ movn H2, G2, SC
+ movn H3, G3, SC
+
+ lwl G0, 0+MSB(NONCE)
+ lwl G1, 4+MSB(NONCE)
+ lwl G2, 8+MSB(NONCE)
+ lwl G3,12+MSB(NONCE)
+ lwr G0, 0+LSB(NONCE)
+ lwr G1, 4+LSB(NONCE)
+ lwr G2, 8+LSB(NONCE)
+ lwr G3,12+LSB(NONCE)
+
+ /* mac = (h + nonce) % (2^128) */
+ addu H0, G0
+ sltu CA, H0, G0
+
+ /* H1 */
+ addu H1, CA
+ sltu CA, H1, CA
+ addu H1, G1
+ sltu G1, H1, G1
+ addu CA, G1
+
+ /* H2 */
+ addu H2, CA
+ sltu CA, H2, CA
+ addu H2, G2
+ sltu G2, H2, G2
+ addu CA, G2
+
+ /* H3 */
+ addu H3, CA
+ addu H3, G3
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ wsbh H0
+ wsbh H1
+ wsbh H2
+ wsbh H3
+ rotr H0, 16
+ rotr H1, 16
+ rotr H2, 16
+ rotr H3, 16
+#endif
+
+ /* store MAC */
+ swl H0, 0+MSB(MAC)
+ swl H1, 4+MSB(MAC)
+ swl H2, 8+MSB(MAC)
+ swl H3,12+MSB(MAC)
+ swr H0, 0+LSB(MAC)
+ swr H1, 4+LSB(MAC)
+ swr H2, 8+LSB(MAC)
+ swr H3,12+LSB(MAC)
+
+ jr $ra
+.end poly1305_emit_mips
+
+#define PR0 $t0
+#define PR1 $t1
+#define PR2 $t2
+#define PR3 $t3
+#define PT0 $t4
+
+/* Input arguments CTX=$a0, KEY=$a1 */
+
+.align 4
+.globl poly1305_init_mips
+.ent poly1305_init_mips
+poly1305_init_mips:
+ lwl PR0, 0+MSB($a1)
+ lwl PR1, 4+MSB($a1)
+ lwl PR2, 8+MSB($a1)
+ lwl PR3,12+MSB($a1)
+ lwr PR0, 0+LSB($a1)
+ lwr PR1, 4+LSB($a1)
+ lwr PR2, 8+LSB($a1)
+ lwr PR3,12+LSB($a1)
+
+ /* store Hx and Carry */
+ sw $zero, PTR_POLY1305_CA
+ sw $zero, PTR_POLY1305_H(0)
+ sw $zero, PTR_POLY1305_H(1)
+ sw $zero, PTR_POLY1305_H(2)
+ sw $zero, PTR_POLY1305_H(3)
+ sw $zero, PTR_POLY1305_H(4)
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ wsbh PR0
+ wsbh PR1
+ wsbh PR2
+ wsbh PR3
+ rotr PR0, 16
+ rotr PR1, 16
+ rotr PR2, 16
+ rotr PR3, 16
+#endif
+
+ lui PT0, 0x0FFF
+ ori PT0, 0xFFFC
+
+ /* AND 0x0fffffff; */
+ ext PR0, PR0, 0, (32-4)
+
+ /* AND 0x0ffffffc; */
+ and PR1, PT0
+ and PR2, PT0
+ and PR3, PT0
+
+ /* store Rx */
+ sw PR0, PTR_POLY1305_R(0)
+ sw PR1, PTR_POLY1305_R(1)
+ sw PR2, PTR_POLY1305_R(2)
+ sw PR3, PTR_POLY1305_R(3)
+
+ /* Jump Back */
+ jr $ra
+.end poly1305_init_mips
diff --git a/lib/zinc/poly1305/poly1305-mips64-cryptogams.S b/lib/zinc/poly1305/poly1305-mips64.S
similarity index 75%
rename from lib/zinc/poly1305/poly1305-mips64-cryptogams.S
rename to lib/zinc/poly1305/poly1305-mips64.S
index 24a6005884c3..272a86c47bcb 100644
--- a/lib/zinc/poly1305/poly1305-mips64-cryptogams.S
+++ b/lib/zinc/poly1305/poly1305-mips64.S
@@ -1,26 +1,49 @@
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
+ * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
* Copyright (C) 2006-2017 CRYPTOGAMS by <appro@openssl.org>. All Rights Reserved.
+ *
+ * This is based in part on Andy Polyakov's implementation from CRYPTOGAMS.
*/

-#include "mips_arch.h"
+#if (defined(_MIPS_ARCH_MIPS64R3) || defined(_MIPS_ARCH_MIPS64R5) || \
+ defined(_MIPS_ARCH_MIPS64R6)) && !defined(_MIPS_ARCH_MIPS64R2)
+#define _MIPS_ARCH_MIPS64R2
+#endif
+
+#ifdef __MIPSEB__
+#define MSB 0
+#define LSB 7
+#else
+#define MSB 7
+#define LSB 0
+#endif

-#ifdef MIPSEB
-# define MSB 0
-# define LSB 7
+#if defined(_MIPS_ARCH_MIPS64R6)
+#define dmultu(rs,rt)
+#define mflo(rd,rs,rt) dmulu rd,rs,rt
+#define mfhi(rd,rs,rt) dmuhu rd,rs,rt
#else
-# define MSB 7
-# define LSB 0
+#define dmultu(rs,rt) dmultu rs,rt
+#define multu(rs,rt) multu rs,rt
+#define mflo(rd,rs,rt) mflo rd
+#define mfhi(rd,rs,rt) mfhi rd
#endif

.text
.set noat
.set noreorder

+/* While most of the assembly in the kernel prefers ENTRY() and ENDPROC(),
+ * there is no existing MIPS assembly that uses it, and MIPS assembler seems
+ * to like its own .ent/.end notation, which the MIPS include files don't
+ * provide in a MIPS-specific ENTRY/ENDPROC definition. So, we skip these
+ * for now, until somebody complains. */
+
.align 5
-.globl poly1305_init
-.ent poly1305_init
-poly1305_init:
+.globl poly1305_init_mips
+.ent poly1305_init_mips
+poly1305_init_mips:
.frame $29,0,$31
.set reorder

@@ -39,13 +62,13 @@ poly1305_init:
ldr $8,0+LSB($5)
ldr $9,8+LSB($5)
#endif
-#ifdef MIPSEB
-# if defined(_MIPS_ARCH_MIPS64R2)
+#ifdef __MIPSEB__
+#if defined(_MIPS_ARCH_MIPS64R2)
dsbh $8,$8 # byte swap
dsbh $9,$9
dshd $8,$8
dshd $9,$9
-# else
+#else
ori $10,$0,0xFF
dsll $1,$10,32
or $10,$1 # 0x000000FF000000FF
@@ -79,7 +102,7 @@ poly1305_init:
dsll $9,32
or $8,$11
or $9,$2
-# endif
+#endif
#endif
li $10,1
dsll $10,32
@@ -100,18 +123,19 @@ poly1305_init:
.Lno_key:
li $2,0 # return 0
jr $31
-.end poly1305_init
+.end poly1305_init_mips
+
.align 5
-.globl poly1305_blocks
-.ent poly1305_blocks
-poly1305_blocks:
+.globl poly1305_blocks_mips
+.ent poly1305_blocks_mips
+poly1305_blocks_mips:
.set noreorder
dsrl $6,4 # number of complete blocks
bnez $6,poly1305_blocks_internal
nop
jr $31
nop
-.end poly1305_blocks
+.end poly1305_blocks_mips

.align 5
.ent poly1305_blocks_internal
@@ -144,13 +168,13 @@ poly1305_blocks_internal:
#endif
daddiu $6,-1
daddiu $5,16
-#ifdef MIPSEB
-# if defined(_MIPS_ARCH_MIPS64R2)
+#ifdef __MIPSEB__
+#if defined(_MIPS_ARCH_MIPS64R2)
dsbh $8,$8 # byte swap
dsbh $9,$9
dshd $8,$8
dshd $9,$9
-# else
+#else
ori $10,$0,0xFF
dsll $1,$10,32
or $10,$1 # 0x000000FF000000FF
@@ -184,7 +208,7 @@ poly1305_blocks_internal:
dsll $9,32
or $8,$11
or $9,$2
-# endif
+#endif
#endif
daddu $12,$8 # accumulate input
daddu $13,$9
@@ -257,10 +281,11 @@ poly1305_blocks_internal:
jr $31
daddu $29,6*8
.end poly1305_blocks_internal
+
.align 5
-.globl poly1305_emit
-.ent poly1305_emit
-poly1305_emit:
+.globl poly1305_emit_mips
+.ent poly1305_emit_mips
+poly1305_emit_mips:
.frame $29,0,$31
.set reorder

@@ -332,7 +357,4 @@ poly1305_emit:
sb $11,15($5)

jr $31
-.end poly1305_emit
-.rdata
-.asciiz "Poly1305 for MIPS64, CRYPTOGAMS by <appro@openssl.org>"
-.align 2
+.end poly1305_emit_mips
diff --git a/lib/zinc/poly1305/poly1305.c b/lib/zinc/poly1305/poly1305.c
index 9dc85f62e806..e3386a0e1554 100644
--- a/lib/zinc/poly1305/poly1305.c
+++ b/lib/zinc/poly1305/poly1305.c
@@ -20,6 +20,8 @@
#include "poly1305-x86_64-glue.c"
#elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
#include "poly1305-arm-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_MIPS) || defined(CONFIG_ZINC_ARCH_MIPS64)
+#include "poly1305-mips-glue.c"
#else
static inline bool poly1305_init_arch(void *ctx,
const u8 key[POLY1305_KEY_SIZE])
--
2.19.0
\
 
 \ /
  Last update: 2018-10-06 04:59    [W:0.937 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site