lkml.org 
[lkml]   [2018]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v2] media: docs-rst: Document m2m stateless video decoder interface
From
Date
Hi,

Le jeudi 04 octobre 2018 à 14:10 -0400, Nicolas Dufresne a écrit :
> Le jeudi 04 octobre 2018 à 14:47 +0200, Paul Kocialkowski a écrit :
> > > + Instance of struct v4l2_ctrl_h264_scaling_matrix, containing the scaling
> > > + matrix to use when decoding the next queued frame. Applicable to the H.264
> > > + stateless decoder.
> > > +
> > > +``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAM``
> >
> > Ditto with "H264_SLICE_PARAMS".
> >
> > > + Array of struct v4l2_ctrl_h264_slice_param, containing at least as many
> > > + entries as there are slices in the corresponding ``OUTPUT`` buffer.
> > > + Applicable to the H.264 stateless decoder.
> > > +
> > > +``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAM``
> > > + Instance of struct v4l2_ctrl_h264_decode_param, containing the high-level
> > > + decoding parameters for a H.264 frame. Applicable to the H.264 stateless
> > > + decoder.
> >
> > Since we require all the macroblocks to decode one frame to be held in
> > the same OUTPUT buffer, it probably doesn't make sense to keep
> > DECODE_PARAM and SLICE_PARAM distinct.
> >
> > I would suggest merging both in "SLICE_PARAMS", similarly to what I
> > have proposed for H.265: https://patchwork.kernel.org/patch/10578023/
> >
> > What do you think?
>
> I don't understand why we add this arbitrary restriction of "all the
> macroblocks to decode one frame". The bitstream may contain multiple
> NALs per frame (e.g. slices), and stateless API shall pass each NAL
> separately imho. The driver can then decide to combine them if needed,
> or to keep them seperate. I would expect most decoder to decode each
> slice independently from each other, even though they write into the
> same frame.

Well, we sort of always assumed that there is a 1:1 correspondency
between request and output frame when implemeting the software for
cedrus, which simplified both userspace and the driver. The approach we
have taken is to use one of the slice parameters for the whole series
of slices and just append the slice data.

Now that you bring it up, I realize this is an unfortunate decision.
This may have been the cause of bugs and limitations with our driver
because the slice parameters may very well be distinct for each slice.
Moreover, I suppose that just appending the slices data implies that
they are coded in the same order as the picture, which is probably
often the case but certainly not anything guaranteed.

So I think we should change our software to associate one request per
slice, not per frame and drop this limitation that all the macroblocks
for the frame must be included.

This will require a number of changes to our driver and userspace, but
also to the MPEG-2 controls where I don't think we have the macroblock
position specified.

So it certainly makes sense to keep SLICE_PARAMS separate from
DECODE_PARAMS for H.264. I should probably also rework the H.265
controls to reflect this. Still, all controls must be passed per slice
(and the hardware decoding pipeline is fully reconfigured then), so I
guess it doesn't make such a big difference in practice.

Thanks for pointing this out, it should help bring the API closer to
what is represented in the bitstream.

Cheers,

Paul

--
Developer of free digital technology and hardware support.

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-10-05 19:10    [W:0.066 / U:1.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site