lkml.org 
[lkml]   [2018]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
On 13-09-18, 09:51, Masahiro Yamada wrote:

> +#define UNIPHIER_MDMAC_CH_IRQ_STAT 0x010 // current hw status (RO)
> +#define UNIPHIER_MDMAC_CH_IRQ_REQ 0x014 // latched STAT (WOC)
> +#define UNIPHIER_MDMAC_CH_IRQ_EN 0x018 // IRQ enable mask
> +#define UNIPHIER_MDMAC_CH_IRQ_DET 0x01c // REQ & EN (RO)
> +#define UNIPHIER_MDMAC_CH_IRQ__ABORT BIT(13)
> +#define UNIPHIER_MDMAC_CH_IRQ__DONE BIT(1)

why notation if UNIPHIER_MDMAC_CH_IRQ__FOO ?

> +#define UNIPHIER_MDMAC_CH_SRC_MODE 0x020 // mode of source
> +#define UNIPHIER_MDMAC_CH_DEST_MODE 0x024 // mode of destination
> +#define UNIPHIER_MDMAC_CH_MODE__ADDR_INC (0 << 4)
> +#define UNIPHIER_MDMAC_CH_MODE__ADDR_DEC (1 << 4)
> +#define UNIPHIER_MDMAC_CH_MODE__ADDR_FIXED (2 << 4)
> +#define UNIPHIER_MDMAC_CH_SRC_ADDR 0x028 // source address
> +#define UNIPHIER_MDMAC_CH_DEST_ADDR 0x02c // destination address
> +#define UNIPHIER_MDMAC_CH_SIZE 0x030 // transfer bytes

Please use /* comment */ style for these

> +/* mc->vc.lock must be held by caller */
> +static struct uniphier_mdmac_desc *__uniphier_mdmac_next_desc(
> + struct uniphier_mdmac_chan *mc)

this can be made to look better by:

static struct uniphier_mdmac_desc *
__uniphier_mdmac_next_desc(struct uniphier_mdmac_chan *mc)

Btw why leading __ for function name here and other places?

> +{
> + struct virt_dma_desc *vd;
> +
> + vd = vchan_next_desc(&mc->vc);
> + if (!vd) {
> + mc->md = NULL;
> + return NULL;
> + }
> +
> + list_del(&vd->node);
> +
> + mc->md = to_uniphier_mdmac_desc(vd);
> +
> + return mc->md;
> +}
> +
> +/* mc->vc.lock must be held by caller */
> +static void __uniphier_mdmac_handle(struct uniphier_mdmac_chan *mc,
> + struct uniphier_mdmac_desc *md)

please align this to previous line opening brace (hint checkpatch with
--strict option will give you the warning)

> +static irqreturn_t uniphier_mdmac_interrupt(int irq, void *dev_id)
> +{
> + struct uniphier_mdmac_chan *mc = dev_id;
> + struct uniphier_mdmac_desc *md;
> + irqreturn_t ret = IRQ_HANDLED;
> + u32 irq_stat;
> +
> + spin_lock(&mc->vc.lock);
> +
> + irq_stat = readl(mc->reg_ch_base + UNIPHIER_MDMAC_CH_IRQ_DET);
> +
> + /*
> + * Some channels share a single interrupt line. If the IRQ status is 0,
> + * this is probably triggered by a different channel.
> + */
> + if (!irq_stat) {
> + ret = IRQ_NONE;
> + goto out;
> + }
> +
> + /* write 1 to clear */
> + writel(irq_stat, mc->reg_ch_base + UNIPHIER_MDMAC_CH_IRQ_REQ);
> +
> + /*
> + * UNIPHIER_MDMAC_CH_IRQ__DONE interrupt is asserted even when the DMA
> + * is aborted. To distinguish the normal completion and the abort,
^^^^
double space..

> +static int uniphier_mdmac_config(struct dma_chan *chan,
> + struct dma_slave_config *config)
> +{
> + /* Nothing in struct dma_slave_config is configurable. */
> + return 0;
> +}

I dont think config callback is mandatory, so we can drop this

> +static enum dma_status uniphier_mdmac_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *txstate)
> +{
> + struct virt_dma_chan *vc;
> + struct virt_dma_desc *vd;
> + struct uniphier_mdmac_chan *mc;
> + struct uniphier_mdmac_desc *md = NULL;
> + enum dma_status stat;
> + unsigned long flags;
> +
> + stat = dma_cookie_status(chan, cookie, txstate);
> + /* Return immediately if we do not need to compute the residue. */
> + if (stat == DMA_COMPLETE || !txstate)
> + return stat;
> +
> + vc = to_virt_chan(chan);
> +
> + spin_lock_irqsave(&vc->lock, flags);
> +
> + mc = to_uniphier_mdmac_chan(vc);
> +
> + if (mc->md && mc->md->vd.tx.cookie == cookie)
> + md = mc->md;
> +
> + if (!md) {
> + vd = vchan_find_desc(vc, cookie);
> + if (vd)
> + md = to_uniphier_mdmac_desc(vd);
> + }

in both of these cases you are calling __uniphier_mdmac_get_residue()
which reads the register and updates. But I think you should read
register only in the first case when descriptor is submitted and not in
latter case when descriptor is queued

> +static int uniphier_mdmac_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct uniphier_mdmac_device *mdev;
> + struct dma_device *ddev;
> + struct resource *res;
> + int nr_chans, ret, i;
> +
> + nr_chans = platform_irq_count(pdev);
> + if (nr_chans < 0)
> + return nr_chans;
> +
> + ret = dma_set_mask(dev, DMA_BIT_MASK(32));
> + if (ret)
> + return ret;
> +
> + mdev = devm_kzalloc(dev, struct_size(mdev, channels, nr_chans),
> + GFP_KERNEL);
> + if (!mdev)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + mdev->reg_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(mdev->reg_base))
> + return PTR_ERR(mdev->reg_base);
> +
> + mdev->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(mdev->clk)) {
> + dev_err(dev, "failed to get clock\n");
> + return PTR_ERR(mdev->clk);
> + }
> +
> + ret = clk_prepare_enable(mdev->clk);
> + if (ret)
> + return ret;
> +
> + ddev = &mdev->ddev;
> + ddev->dev = dev;
> + dma_cap_set(DMA_PRIVATE, ddev->cap_mask);
> + ddev->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED);
> + ddev->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED);

undefined?

> +static int uniphier_mdmac_remove(struct platform_device *pdev)
> +{
> + struct uniphier_mdmac_device *mdev = platform_get_drvdata(pdev);
> +
> + of_dma_controller_free(pdev->dev.of_node);
> + dma_async_device_unregister(&mdev->ddev);
> + clk_disable_unprepare(mdev->clk);

at this point your irq is registered and can be fired, the tasklets are
not killed :(
--
~Vinod

\
 
 \ /
  Last update: 2018-10-05 16:58    [W:0.114 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site