lkml.org 
[lkml]   [2018]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/13] dt-bindings: timer: renesas: cmt: document R-Car gen3 support
Date
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Document support for the R-Car gen3 CMT types 0/1 bindings -- they seem
to be the same CMT types 0/1 as in the R-Car gen2 SoCs.

Also document R8A779{7|8}0 bindings as these are the R-Car gen3 SoCs for
which the initial support was done.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
Documentation/devicetree/bindings/timer/renesas,cmt.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index b40add2..49948fc 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -34,6 +34,10 @@ Required Properties:
- "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
+ - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
+ - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970.
+ - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
+ - "renesas,r8a77980-cmt1" for the 48-bit CMT1 device included in r8a77980.

- "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
and RZ/G1.
@@ -41,6 +45,9 @@ Required Properties:
and RZ/G1.
These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
listed above.
+ - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3.
+ - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3.
+ These are fallbacks for R-Car Gen3 entries listed above.

- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
--
2.7.4
\
 
 \ /
  Last update: 2018-10-05 16:36    [W:0.106 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site