lkml.org 
[lkml]   [2018]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] Add SECO Boards CEC device driver
On Thu, Oct 04, 2018 at 02:29:32PM +0200, Neil Armstrong wrote:
> Hi Ettore,
>
> On 02/10/2018 18:59, ektor5 wrote:
> > This series of patches aims to add CEC functionalities to SECO
> > devices, in particular UDOO X86.
> >
> > The communication is achieved via Braswell SMBus (i2c-i801) to the
> > onboard STM32 microcontroller that handles the CEC signals. The driver
> > use direct access to the PCI addresses, due to the limitations of the
> > specific driver in presence of ACPI calls.
> >
> > The basic functionalities are tested with success with cec-ctl and
> > cec-compliance.
>
> Glad to see another user of the i915 cec notifier !

Thanks to you for the patch! It works really well!

Ettore

>
> Neil
>
> >
> > Ettore Chimenti (2):
> > media: add SECO cec driver
> > seco-cec: add Consumer-IR support
> >
> > MAINTAINERS | 6 +
> > drivers/media/platform/Kconfig | 21 +
> > drivers/media/platform/Makefile | 4 +
> > drivers/media/platform/seco-cec/Makefile | 1 +
> > drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++
> > drivers/media/platform/seco-cec/seco-cec.h | 143 ++++
> > 6 files changed, 1034 insertions(+)
> > create mode 100644 drivers/media/platform/seco-cec/Makefile
> > create mode 100644 drivers/media/platform/seco-cec/seco-cec.c
> > create mode 100644 drivers/media/platform/seco-cec/seco-cec.h
> >
>

\
 
 \ /
  Last update: 2018-10-04 23:19    [W:1.581 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site