lkml.org 
[lkml]   [2018]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH i2c-next v6 2/5] i2c: Add support reading of 'timeout-ms' and '#retries' properties
Date
This commit adds support for 'timeout-ms' and '#retries' properties
to set 'timeout' and 'retries' values in 'struct i2c_adapter' in
case an adapter node has the properties. Still the values can be
set by I2C_TIMEOUT and I2C_RETRIES ioctls on cdev at runtime too.

These properties may not be supported by all drivers. However, if
a driver wants to support one of them, it should adapt the
bindings in the dt-bindings document.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
drivers/i2c/i2c-core-base.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 9ee9a15e7134..433867e9af2f 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1214,6 +1214,7 @@ EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
static int i2c_register_adapter(struct i2c_adapter *adap)
{
int res = -EINVAL;
+ u32 timeout_ms = 0;

/* Can't register until after driver model init */
if (WARN_ON(!is_registered)) {
@@ -1239,8 +1240,13 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
INIT_LIST_HEAD(&adap->userspace_clients);

/* Set default timeout to 1 second if not already set */
- if (adap->timeout == 0)
- adap->timeout = HZ;
+ if (adap->timeout == 0) {
+ device_property_read_u32(&adap->dev, "timeout-ms", &timeout_ms);
+ adap->timeout = timeout_ms ? msecs_to_jiffies(timeout_ms) : HZ;
+ }
+
+ /* Set retries value if it has the property setting */
+ device_property_read_u32(&adap->dev, "#retries", &adap->retries);

/* register soft irqs for Host Notify */
res = i2c_setup_host_notify_irq_domain(adap);
--
2.19.0
\
 
 \ /
  Last update: 2018-10-04 22:44    [W:0.588 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site