lkml.org 
[lkml]   [2018]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] mtd: spi-nor: add support for octal mode data transfer
On Thu,  4 Oct 2018 14:18:38 +0530
Yogesh Gaur <yogeshnarayan.gaur@nxp.com> wrote:

> Add support for octal mode data transfer for Micron mt35xu512aba.
>
> Unfortunately, this flash is only complaint to SFDP JESD216B and does
> not seem to support newer JESD216C standard that provides auto detection
> of Octal mode capabilities and opcodes. Therefore, this capability is
> manually added using new SPI_NOR_OCTAL_READ flag.
>
> Added support of Octal mode parsing for 'm25p80' spi-nor flash interface.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
> ---
> drivers/mtd/devices/m25p80.c | 9 ++++++++-
> drivers/mtd/spi-nor/spi-nor.c | 14 +++++++++++++-
> include/linux/mtd/spi-nor.h | 8 ++++++++

You mix a lot of changes in a single patch, please try to split it up:

1/ Add new opcodes and patch spi_nor_convert_3to4_read/program() and
spi_nor_init_params()
2/ Modify m25p80.c to support octal mode
3/ Add a new entry for mt35xu512aba

> 3 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index fe260cc..e22aa2b 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -182,7 +182,14 @@ static int m25p_probe(struct spi_mem *spimem)
> spi_mem_set_drvdata(spimem, flash);
> flash->spimem = spimem;
>
> - if (spi->mode & SPI_RX_QUAD) {
> + if (spi->mode & SPI_RX_OCTAL) {
> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
> +
> + if (spi->mode & SPI_TX_OCTAL)
> + hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
> + SNOR_HWCAPS_PP_1_1_8 |
> + SNOR_HWCAPS_PP_1_8_8);
> + } else if (spi->mode & SPI_RX_QUAD) {
> hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
>
> if (spi->mode & SPI_TX_QUAD)
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 6042df8..0587b9c 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -89,6 +89,7 @@ struct flash_info {
> #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
> #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
> #define USE_CLSR BIT(14) /* use CLSR command */
> +#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */
>
> int (*quad_enable)(struct spi_nor *nor);
> };
> @@ -208,6 +209,8 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode)
> { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
> { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
> { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
> + { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B },
> + { SPINOR_OP_READ_1_8_8, SPINOR_OP_READ_1_8_8_4B },
>
> { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
> { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
> @@ -224,6 +227,8 @@ static inline u8 spi_nor_convert_3to4_program(u8 opcode)
> { SPINOR_OP_PP, SPINOR_OP_PP_4B },
> { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B },
> { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B },
> + { SPINOR_OP_PP_1_1_8, SPINOR_OP_PP_1_1_8_4B },
> + { SPINOR_OP_PP_1_8_8, SPINOR_OP_PP_1_8_8_4B },
> };
>
> return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
> @@ -1114,7 +1119,7 @@ static const struct flash_info spi_nor_ids[] = {
> { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
>
> /* Micron */
> - { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES) },
> + { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
>
> /* PMC */
> { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
> @@ -2493,6 +2498,13 @@ static int spi_nor_init_params(struct spi_nor *nor,
> SNOR_PROTO_1_1_4);
> }
>
> + if (info->flags & SPI_NOR_OCTAL_READ) {
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
> + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
> + 0, 8, SPINOR_OP_READ_1_1_8,
> + SNOR_PROTO_1_1_8);
> + }
> +
> /* Page Program settings. */
> params->hwcaps.mask |= SNOR_HWCAPS_PP;
> spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index f43bfc5..b23c69d 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -50,9 +50,13 @@
> #define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */
> #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */
> #define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */
> +#define SPINOR_OP_READ_1_1_8 0x8b /* Read data bytes (Octal Output SPI) */
> +#define SPINOR_OP_READ_1_8_8 0xcb /* Read data bytes (Octal I/O SPI) */
> #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
> #define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */
> #define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */
> +#define SPINOR_OP_PP_1_1_8 0x82 /* Octal page program */
> +#define SPINOR_OP_PP_1_8_8 0xc2 /* Octal page program */
> #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */
> #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
> #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */
> @@ -73,9 +77,13 @@
> #define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */
> #define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */
> #define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */
> +#define SPINOR_OP_READ_1_1_8_4B 0x7c /* Read data bytes (Octal Output SPI) */
> +#define SPINOR_OP_READ_1_8_8_4B 0xcc /* Read data bytes (Octal I/O SPI) */
> #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */
> #define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */
> #define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */
> +#define SPINOR_OP_PP_1_1_8_4B 0x84 /* Octal page program */
> +#define SPINOR_OP_PP_1_8_8_4B 0x8e /* Octal page program */
> #define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */
> #define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
> #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */

\
 
 \ /
  Last update: 2018-10-04 11:15    [W:0.109 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site