lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 4/4] ARM: dts: imx6sx: Add DISPLAY power domain support
Date
On 10/31/2018 8:12 AM, Shawn Guo wrote:
> On Mon, Oct 08, 2018 at 06:06:23PM +0000, Leonard Crestez wrote:
>> This was implemented in the driver but not actually defined and
>> referenced in dts. This makes it always on.
>>
>> From reference manual in section "10.4.1.4.1 Power Distribution":
>>
>> "Display domain - The DISPLAY domain contains GIS, CSI, PXP, LCDIF,
>> PCIe, DCIC, and LDB. It is supplied by internal regulator."
>>
>> The current pd_pcie is actually only for PCIE_PHY, the PCIE ip block is
>> actually inside the DISPLAY domain. Handle this by adding the pcie node
>> in both power domains.
>>
>> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
>
> Applied, thanks.

As mentioned in the cover letter this requires multi-PD support in
imx-pci to be implemented, specifically PATCH 3/4 of this series:

https://lore.kernel.org/patchwork/patch/996810/

Unless that also gets merged soon via pci I expect issues in linux-next.
The patch already has reviewed-by tags so "merging it soon" is not
unreasonable.

Link to cover: https://lore.kernel.org/patchwork/cover/996807/

There is also an mxsfb dependency but that's already merged in
torvalds/master.

\
 
 \ /
  Last update: 2018-10-31 13:19    [W:0.999 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site