lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Regression found (Stop-marking-clocks-as-CLK_IS_CRITICAL)
From
Date
Hi,

On 30-10-18 19:56, Mogens Jensen wrote:
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Tuesday, October 30, 2018 4:04 PM, Hans de Goede <hdegoede@redhat.com> wrote:
>
>> Hi,
>>
>> On 30-10-18 16:46, Hans de Goede wrote:
>>
>>> Hi,
>>> On 30-10-18 16:04, Pierre-Louis Bossart wrote:
>>>
>>>> In addition I am not aware of any baytrail device using plt_clk_0, so moving a common machine driver such a cht_bsw_max98090_ti to use plt_clk0 only would break other devices (e.g. Rambi/Orco). Asking for both clocks to be on might work though,
>>>
>>> Ok, so we need to have a DMI based quirk for the Swanky and maybe also
>>> the clapper to use plt_clk_0 there. Asking for 2 clks if we only need
>>> one does not seem like a good plan.
>>
>> Dean, Mogens,
>>
>> To write a proper patch for this I'm going to need DMI strings
>> from your devices.
>>
>> Can you please run (as normal user):
>>
>> grep . /sys/class/dmi/id/* 2> /dev/null
>>
>> And reply with the output of this command?
> I have attached the output from a coreboot seabios based clapper.

Thank you.

> Should I still test 0001-ASoC-intel-cht_bsw_max98090_ti-Use-pmc_plt_clk_0-ins.patch with SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH and asoundrc from Dean? There seems to have been some development in the case since that request was made.

Yes please test that, I expect that to also fix things for the
Clapper, but I need to have that confirmed before submitting a
patch upstream adding a quirk for the Clapper to use pmc_plt_clk_0
instead of pmc_plt_clk_3.

Regards,

Hans




\
 
 \ /
  Last update: 2018-10-30 20:10    [W:0.123 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site