lkml.org 
[lkml]   [2018]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Logitech high-resolution scrolling..
Em Sun, 28 Oct 2018 14:08:31 -0700
Linus Torvalds <torvalds@linux-foundation.org> escreveu:

> On Sun, Oct 28, 2018 at 12:13 PM Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> >
> > So the recent change to enable the high-res scrolling really seems a
> > bit *too* extreme.
> >
> > Is there some middle ground that turns the mouse from "look at it
> > sideways and it starts scrolling" to something slightly more
> > reasonable?
>
> Actually, I think the bug may be in the generic HID high-resolution
> scrolling code, and I only notice because the Logitech support means
> that now I see it.
>
> In particular, if you look at hid_scroll_counter_handle_scroll(),
> you'll notice that it tries to turn a high-res scroll event into a
> regular wheel event by using the resolution_multiplier.
>
> But that code looks really broken. It tries to react to a "half
> multiplier" thing:
>
> int threshold = counter->resolution_multiplier / 2;
> ..
> counter->remainder += hi_res_value;
> if (abs(counter->remainder) >= threshold) {
>
> and that's absolutely and entirely wrong.
>
> Imagine that the high-res wheel counter has just moved a bit up (by
> one high-res) tick, so now it's at the half-way mark to the
> resolution_multiplier, and we scroll up by one:
>
> low_res_scroll_amount =
> counter->remainder / counter->resolution_multiplier
> + (hi_res_value > 0 ? 1 : -1);
> input_report_rel(counter->dev, REL_WHEEL,
> low_res_scroll_amount);
>
> and then correct for it:
>
> counter->remainder -=
> low_res_scroll_amount * counter->resolution_multiplier;
>
> now we went from "half resolution multiplier positive" to "half negative".
>
> Which means that next time that the high-res event happens by even
> just one high-resolution tick in the other direction, we'll now
> generate a low-resolution scroll event in the other direction.
>
> In other words, that function results in unstable behavior. Tiny tiny
> movements back-and-forth in the high-res wheel events (which could be
> just because either the sensor is unstable, or the wheel is wiggling
> imperceptibly) can result in visible movement in the low-res
> ("regular") wheel reporting.
>
> There is no "damping" function, in other words. Noise in the high
> resolution reading can result in noise in the regular wheel reporting.
>
> So that threshold handling needs to be fixed, I feel. Either get rid
> of it entirely (you need to scroll a *full* resolution_multiplier to
> get a regular wheel event), or the counter->remainder needs to be
> *cleared* when a wheel event has been sent so that you don't get into
> the whole "back-and-forth" mode.
>
> Or some other damping model. I suspect there are people who have
> researched what the right answer is, but I guarantee that the current
> code is not the right answer.
>
> I suspect this also explains why I *sometimes* see that "just moving
> the mouse sends wheel events", and at other times don't. It needs to
> get close to that "half a resolution multiplier" stage to get into the
> bad cases, but then tiny tiny perturbations can cause unstable
> behavior.
>
> I can't be the only person seeing this, but I guess the Logitech mouse
> is right now the only one that uses the new generic HID code, and I
> guess not a lot of people have been *using* it.

I remember I submitted in the past some patches adding a different event
for the high scroll mode. I have myself a MX Anywhere 2, and even wrote
some patches for Solaar[1] in order to allow selecting between low
res and high res wheel modes.

The problem I faced, on that time, was similar to yours: when the
high res wheel was enabled, it was very hard to control the mouse,
specially when using the wheel in "free" mode (with I do).

I remember that the patchset I sent was not actually applied, but I
didn't followed what happened after that (got sidetracked by
something else).

[1] https://github.com/pwr/Solaar

Thanks,
Mauro

\
 
 \ /
  Last update: 2018-10-30 16:54    [W:0.106 / U:4.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site