lkml.org 
[lkml]   [2018]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 2/2] clk: qcom : dispcc: Add support for display port clocks
From
Date


On 10/30/2018 12:13 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2018-10-28 03:34:55)
>> Hello Stephen,
>>
>> On 2018-10-19 16:04, Taniya Das wrote:
>>> Hello Stephen,
>>>
>>> On 10/10/2018 2:04 AM, Stephen Boyd wrote:
>>>> Quoting Taniya Das (2018-10-09 06:57:47)
>>>>> diff --git a/drivers/clk/qcom/dispcc-sdm845.c
>>>>> b/drivers/clk/qcom/dispcc-sdm845.c
>>>>> index 0cc4909..6d3136a 100644
>>>>> --- a/drivers/clk/qcom/dispcc-sdm845.c
>>>>> +++ b/drivers/clk/qcom/dispcc-sdm845.c
>>>>> @@ -128,6 +144,100 @@ enum {
>>>>> },
>>>>> };
>>>>>
>>>>> +static const struct freq_tbl ftbl_disp_cc_mdss_dp_aux_clk_src[] = {
>>>>> + F(19200000, P_BI_TCXO, 1, 0, 0),
>>>>> + { }
>>>>> +};
>>>>> +
>>>>> +static struct clk_rcg2 disp_cc_mdss_dp_aux_clk_src = {
>>>>> + .cmd_rcgr = 0x219c,
>>>>> + .mnd_width = 0,
>>>>> + .hid_width = 5,
>>>>> + .parent_map = disp_cc_parent_map_2,
>>>>> + .freq_tbl = ftbl_disp_cc_mdss_dp_aux_clk_src,
>>>>> + .clkr.hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_aux_clk_src",
>>>>> + .parent_names = disp_cc_parent_names_2,
>>>>> + .num_parents = 2,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_rcg2_ops,
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static const struct freq_tbl ftbl_disp_cc_mdss_dp_crypto_clk_src[] =
>>>>> {
>>>>> + F(108000, P_DP_PHY_PLL_LINK_CLK, 3, 0, 0),
>>>>> + F(180000, P_DP_PHY_PLL_LINK_CLK, 3, 0, 0),
>>>>> + F(360000, P_DP_PHY_PLL_LINK_CLK, 3, 0, 0),
>>>>> + F(540000, P_DP_PHY_PLL_LINK_CLK, 3, 0, 0),
>>>>> + { }
>>>>> +};
>>>>> +
>>>>> +static struct clk_rcg2 disp_cc_mdss_dp_crypto_clk_src = {
>>>>> + .cmd_rcgr = 0x2154,
>>>>> + .mnd_width = 0,
>>>>> + .hid_width = 5,
>>>>> + .parent_map = disp_cc_parent_map_1,
>>>>> + .freq_tbl = ftbl_disp_cc_mdss_dp_crypto_clk_src,
>>>>> + .clkr.hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_crypto_clk_src",
>>>>> + .parent_names = disp_cc_parent_names_1,
>>>>> + .num_parents = 4,
>>>>> + .flags = CLK_GET_RATE_NOCACHE,
>>>>
>>>> Why?
>>>>
>>>>> + .ops = &clk_rcg2_ops,
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static const struct freq_tbl ftbl_disp_cc_mdss_dp_link_clk_src[] = {
>>>>> + F(162000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
>>>>> + F(270000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
>>>>> + F(540000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
>>>>> + F(810000, P_DP_PHY_PLL_LINK_CLK, 1, 0, 0),
>>>>
>>>> Are these in kHz? They really look like it and that's bad. Why do we
>>>> need them at all? Just to make sure the display driver picks these
>>>> exact
>>>> frequencies? It seems like we could just pass whatever number comes in
>>>> up to the parent and see what it can do.
>>>>
>>>
>>> Let me check back the reason we had to make this change.
>>
>> We will need this flag since we reset/power-down the PLL every time we
>> disconnect/connect the DP cable or during suspend/resume. Only with this
>> flag, the calls to the PLL driver are properly called.
>
> What does this mean? I wanted to know about the weird frequencies listed
> above, and why it can't be done without a frequency table and direct
> rates passed up to the parent.
>

OOps, my bad :(.

We added these changes to handle higher clock rates. These rates when
greater than 4.3Ghz cannot be represented in 32bit variables. For DP, we
already have 5.4G and 8.1GHz freq for VCO clock. We will need these Khz
freq list in clock driver.
Let me check if they can do something like the byte/pixel clocks of
display.
>>
>>>
>>>>> + { }
>>>>> +};
>>>>> +
>>>>> +static struct clk_rcg2 disp_cc_mdss_dp_link_clk_src = {
>>>>> + .cmd_rcgr = 0x2138,
>>>>> + .mnd_width = 0,
>>>>> + .hid_width = 5,
>>>>> + .parent_map = disp_cc_parent_map_1,
>>>>> + .freq_tbl = ftbl_disp_cc_mdss_dp_link_clk_src,
>>>>> + .clkr.hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_link_clk_src",
>>>>> + .parent_names = disp_cc_parent_names_1,
>>>>> + .num_parents = 4,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_rcg2_ops,
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static struct clk_rcg2 disp_cc_mdss_dp_pixel1_clk_src = {
>>>>> + .cmd_rcgr = 0x2184,
>>>>> + .mnd_width = 16,
>>>>> + .hid_width = 5,
>>>>> + .parent_map = disp_cc_parent_map_1,
>>>>> + .clkr.hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_pixel1_clk_src",
>>>>> + .parent_names = disp_cc_parent_names_1,
>>>>> + .num_parents = 4,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_dp_ops,
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static struct clk_rcg2 disp_cc_mdss_dp_pixel_clk_src = {
>>>>> + .cmd_rcgr = 0x216c,
>>>>> + .mnd_width = 16,
>>>>> + .hid_width = 5,
>>>>> + .parent_map = disp_cc_parent_map_1,
>>>>> + .clkr.hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_pixel_clk_src",
>>>>> + .parent_names = disp_cc_parent_names_1,
>>>>> + .num_parents = 4,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_dp_ops,
>>>>> + },
>>>>> +};
>>>>> +
>>>>> static const struct freq_tbl ftbl_disp_cc_mdss_esc0_clk_src[] = {
>>>>> F(19200000, P_BI_TCXO, 1, 0, 0),
>>>>> { }
>>>>> @@ -391,6 +501,115 @@ enum {
>>>>> },
>>>>> };
>>>>>
>>>>> +static struct clk_branch disp_cc_mdss_dp_aux_clk = {
>>>>> + .halt_reg = 0x2054,
>>>>> + .halt_check = BRANCH_HALT,
>>>>> + .clkr = {
>>>>> + .enable_reg = 0x2054,
>>>>> + .enable_mask = BIT(0),
>>>>> + .hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_aux_clk",
>>>>> + .parent_names = (const char *[]){
>>>>> + "disp_cc_mdss_dp_aux_clk_src",
>>>>> + },
>>>>> + .num_parents = 1,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_branch2_ops,
>>>>> + },
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static struct clk_branch disp_cc_mdss_dp_crypto_clk = {
>>>>> + .halt_reg = 0x2048,
>>>>> + .halt_check = BRANCH_HALT,
>>>>> + .clkr = {
>>>>> + .enable_reg = 0x2048,
>>>>> + .enable_mask = BIT(0),
>>>>> + .hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_crypto_clk",
>>>>> + .parent_names = (const char *[]){
>>>>> + "disp_cc_mdss_dp_crypto_clk_src",
>>>>> + },
>>>>> + .num_parents = 1,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_branch2_ops,
>>>>> + },
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static struct clk_branch disp_cc_mdss_dp_link_clk = {
>>>>> + .halt_reg = 0x2040,
>>>>> + .halt_check = BRANCH_HALT,
>>>>> + .clkr = {
>>>>> + .enable_reg = 0x2040,
>>>>> + .enable_mask = BIT(0),
>>>>> + .hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_link_clk",
>>>>> + .parent_names = (const char *[]){
>>>>> + "disp_cc_mdss_dp_link_clk_src",
>>>>> + },
>>>>> + .num_parents = 1,
>>>>> + .flags = CLK_SET_RATE_PARENT,
>>>>> + .ops = &clk_branch2_ops,
>>>>> + },
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +/* reset state of disp_cc_mdss_dp_link_div_clk_src divider is 0x3
>>>>> (div 4) */
>>>>
>>>> Not sure what this comment is for. But it's interesting nonetheless.
>>>>
>>>>> +static struct clk_branch disp_cc_mdss_dp_link_intf_clk = {
>>>>> + .halt_reg = 0x2044,
>>>>> + .halt_check = BRANCH_HALT,
>>>>> + .clkr = {
>>>>> + .enable_reg = 0x2044,
>>>>> + .enable_mask = BIT(0),
>>>>> + .hw.init = &(struct clk_init_data){
>>>>> + .name = "disp_cc_mdss_dp_link_intf_clk",
>>>>> + .parent_names = (const char *[]){
>>>>> + "disp_cc_mdss_dp_link_clk_src",
>>>>> + },
>>>>> + .num_parents = 1,
>>>>> + .flags = CLK_GET_RATE_NOCACHE,
>>>>
>>>> Why?
>>>>
>>>
>>> It was a requirement, but let me get back on this too.
>>>
>> I had a discussion with the Display Port teams and below is the requirement,
>>
>> This flag is required since we reset/power-down the PLL every time they
>> disconnect/connect the DP cable or during suspend/resume.
>> Only with this flag, the calls to the PLL driver properly.
>
> Ok. So that explains the get rate nocache flag. Can you please add a
> comment that explains that these clk registers here are lost across
> suspend/resume of the display device? It really sounds like these
> display clks are inside of the display power domain and thus they lose
> their state across the display power domain power down. It would be
> better if we could properly implement suspend/restore for these clk
> registers across suspend/resume of the display device so that we don't
> need this nocache flag and the display code can work together with the
> clk code here to restore the frequency to the clk.
>
> Is it really the case that the rcg here is always selecting a particular
> PLL and doing a div-1? Because that is very simple then to just write
> that setting again on genpd restore.
>

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

\
 
 \ /
  Last update: 2018-10-30 07:02    [W:0.148 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site