lkml.org 
[lkml]   [2018]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] fs/proc: introduce /proc/stat2 file
From
Date
On 10/29/2018 03:25 PM, Davidlohr Bueso wrote:
> A recent report from a large database vendor which I shall not name
> shows concerns about poor performance when consuming /proc/stat info.
> Particularly kstat_irq() pops up in the profiles and most time is
> being spent there. The overall system is under a lot of irqs and
> almost 1k cores, thus this comes to little surprise.
>
> Granted that procfs in general is not known for its performance,
> nor designed for it, for that matter. Some users, however may be able
> to overcome this performance limitation, some not. Therefore it isn't
> bad having a kernel option for users that don't want any hard irq info
> -- and care enough about this.
>
> This patch introduces a new /proc/stat2 file that is identical to the
> regular 'stat' except that it zeroes all hard irq statistics. The new
> file is a drop in replacement to stat for users that need performance.
>
> The stat file is not touched, of course -- this was also previously
> suggested by Waiman:
> https://lore.kernel.org/lkml/1524166562-5644-1-git-send-email-longman@redhat.com/
>
> Signed-off-by: Davidlohr Bueso <dbueso@suse.de>

I am wondering if /proc/stat_noirqs will be a more descriptive name of
the intent of this new procfs file or we should just go with the more
generic stat2 name.

Cheers,
Longman

> ---
> Documentation/filesystems/proc.txt | 12 +++++++---
> fs/proc/stat.c | 45 ++++++++++++++++++++++++++++++++------
> 2 files changed, 47 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
> index 12a5e6e693b6..563b01decb1e 100644
> --- a/Documentation/filesystems/proc.txt
> +++ b/Documentation/filesystems/proc.txt
> @@ -27,7 +27,7 @@ Table of Contents
> 1.5 SCSI info
> 1.6 Parallel port info in /proc/parport
> 1.7 TTY info in /proc/tty
> - 1.8 Miscellaneous kernel statistics in /proc/stat
> + 1.8 Miscellaneous kernel statistics in /proc/stat and /proc/stat2
> 1.9 Ext4 file system parameters
>
> 2 Modifying System Parameters
> @@ -140,6 +140,7 @@ Table 1-1: Process specific entries in /proc
> mem Memory held by this process
> root Link to the root directory of this process
> stat Process status
> + stat2 Process status without irq information
> statm Process memory status information
> status Process status in human readable form
> wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function
> @@ -1301,8 +1302,8 @@ To see which tty's are currently in use, you can simply look into the file
> unknown /dev/tty 4 1-63 console
>
>
> -1.8 Miscellaneous kernel statistics in /proc/stat
> --------------------------------------------------
> +1.8 Miscellaneous kernel statistics in /proc/stat and /proc/stat2
> +-----------------------------------------------------------------
>
> Various pieces of information about kernel activity are available in the
> /proc/stat file. All of the numbers reported in this file are aggregates
> @@ -1371,6 +1372,11 @@ of the possible system softirqs. The first column is the total of all
> softirqs serviced; each subsequent column is the total for that particular
> softirq.
>
> +The stat2 file acts as a performance alternative to /proc/stat for workloads
> +and systems that care and are under heavy irq load. In order to to be completely
> +compatible, /proc/stat and /proc/stat2 are identical with the exception that the
> +later will show 0 for any (hard)irq-related fields. This refers particularly
> +to the "intr" line and 'irq' column for that aggregate in the cpu line.
>
> 1.9 Ext4 file system parameters
> -------------------------------
> diff --git a/fs/proc/stat.c b/fs/proc/stat.c
> index 535eda7857cf..349040270003 100644
> --- a/fs/proc/stat.c
> +++ b/fs/proc/stat.c
> @@ -79,7 +79,7 @@ static u64 get_iowait_time(int cpu)
>
> #endif
>
> -static int show_stat(struct seq_file *p, void *v)
> +static int __show_stat(struct seq_file *p, void *v, bool irq_stats)
> {
> int i, j;
> u64 user, nice, system, idle, iowait, irq, softirq, steal;
> @@ -100,13 +100,17 @@ static int show_stat(struct seq_file *p, void *v)
> system += kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM];
> idle += get_idle_time(i);
> iowait += get_iowait_time(i);
> - irq += kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> softirq += kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ];
> steal += kcpustat_cpu(i).cpustat[CPUTIME_STEAL];
> guest += kcpustat_cpu(i).cpustat[CPUTIME_GUEST];
> guest_nice += kcpustat_cpu(i).cpustat[CPUTIME_GUEST_NICE];
> - sum += kstat_cpu_irqs_sum(i);
> - sum += arch_irq_stat_cpu(i);
> +
> + if (irq_stats) {
> + irq += kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> +
> + sum += kstat_cpu_irqs_sum(i);
> + sum += arch_irq_stat_cpu(i);
> + }
>
> for (j = 0; j < NR_SOFTIRQS; j++) {
> unsigned int softirq_stat = kstat_softirqs_cpu(j, i);
> @@ -115,7 +119,9 @@ static int show_stat(struct seq_file *p, void *v)
> sum_softirq += softirq_stat;
> }
> }
> - sum += arch_irq_stat();
> +
> + if (irq_stats)
> + sum += arch_irq_stat();
>
> seq_put_decimal_ull(p, "cpu ", nsec_to_clock_t(user));
> seq_put_decimal_ull(p, " ", nsec_to_clock_t(nice));
> @@ -136,7 +142,8 @@ static int show_stat(struct seq_file *p, void *v)
> system = kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM];
> idle = get_idle_time(i);
> iowait = get_iowait_time(i);
> - irq = kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> + if (irq_stats)
> + irq = kcpustat_cpu(i).cpustat[CPUTIME_IRQ];
> softirq = kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ];
> steal = kcpustat_cpu(i).cpustat[CPUTIME_STEAL];
> guest = kcpustat_cpu(i).cpustat[CPUTIME_GUEST];
> @@ -158,7 +165,7 @@ static int show_stat(struct seq_file *p, void *v)
>
> /* sum again ? it could be updated? */
> for_each_irq_nr(j)
> - seq_put_decimal_ull(p, " ", kstat_irqs_usr(j));
> + seq_put_decimal_ull(p, " ", irq_stats ? kstat_irqs_usr(j) : 0);
>
> seq_printf(p,
> "\nctxt %llu\n"
> @@ -181,6 +188,16 @@ static int show_stat(struct seq_file *p, void *v)
> return 0;
> }
>
> +static int show_stat(struct seq_file *p, void *v)
> +{
> + return __show_stat(p, v, true);
> +}
> +
> +static int show_stat2(struct seq_file *p, void *v)
> +{
> + return __show_stat(p, v, false);
> +}
> +
> static int stat_open(struct inode *inode, struct file *file)
> {
> unsigned int size = 1024 + 128 * num_online_cpus();
> @@ -190,6 +207,12 @@ static int stat_open(struct inode *inode, struct file *file)
> return single_open_size(file, show_stat, NULL, size);
> }
>
> +static int stat2_open(struct inode *inode, struct file *file)
> +{
> + unsigned int size = 1024 + 128 * num_online_cpus();
> + return single_open_size(file, show_stat2, NULL, size);
> +}
> +
> static const struct file_operations proc_stat_operations = {
> .open = stat_open,
> .read = seq_read,
> @@ -197,9 +220,17 @@ static const struct file_operations proc_stat_operations = {
> .release = single_release,
> };
>
> +static const struct file_operations proc_stat2_operations = {
> + .open = stat2_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> static int __init proc_stat_init(void)
> {
> proc_create("stat", 0, NULL, &proc_stat_operations);
> + proc_create("stat2", 0, NULL, &proc_stat2_operations);
> return 0;
> }
> fs_initcall(proc_stat_init);



\
 
 \ /
  Last update: 2018-10-29 20:35    [W:0.111 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site