lkml.org 
[lkml]   [2018]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
On Wed, 3 Oct 2018 20:59:53 +0200
Boris Brezillon <boris.brezillon@bootlin.com> wrote:

> On Wed, 03 Oct 2018 11:37:17 -0700
> Joe Perches <joe@perches.com> wrote:
>
> > On Wed, 2018-10-03 at 15:22 +0200, Boris Brezillon wrote:
> > > The reg property of devices connected to an I3C bus have 3 cells, and
> > > filling them manually is not trivial. Provides macros to help doing
> > > that.
> >
> > This patch logic seems excessively fragile.
>
> Keep in mind that this header is meant to be include by .dts(i) files,
> not regular .c files.
>
> >
> > > Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > ---
> > > Changes in v8:
> > > - None
> > >
> > > Changes in v5:
> > > - none
> > > ---
> > > include/dt-bindings/i3c/i3c.h | 28 ++++++++++++++++++++++++++++
> > > 1 file changed, 28 insertions(+)
> > > create mode 100644 include/dt-bindings/i3c/i3c.h
> > >
> > > diff --git a/include/dt-bindings/i3c/i3c.h b/include/dt-bindings/i3c/i3c.h
> > > new file mode 100644
> > > index 000000000000..97448c546649
> > > --- /dev/null
> > > +++ b/include/dt-bindings/i3c/i3c.h
> > > @@ -0,0 +1,28 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +/*
> > > + * Copyright (C) 2017 Cadence Design Systems Inc.
> > > + *
> > > + * Author: Boris Brezillon <boris.brezillon@bootlin.com>
> > > + */
> > > +
> > > +#ifndef _DT_BINDINGS_I3C_I3C_H
> > > +#define _DT_BINDINGS_I3C_I3C_H
> > > +
> > > +#define IS_I2C_DEV 0x80000000
> > > +
> > > +#define I2C_DEV(addr, lvr) \
> > > + (addr) (IS_I2C_DEV | (lvr)) 0x0
> >
> > This looks to be missing surrounding parentheses.
>
> Actually it's not. The macro is supposed to declare 3 u32 integers each
> of them separated by a space:
>
> reg = <I2C_DEV(0x34, 0x1)>;
>
> is translated into
>
> reg = <0x34 0x80000001 0x0>;
>
> >
> > > +
> > > +#define I3C_PID(manufid, partid, instid, extrainfo) \
> > > + ((manufid) << 1) \
> > > + (((partid) << 16) | ((instid) << 12) | (extrainfo))
> >
> > This macro doesn't make any sense. Missing a shift and an or?
>
> Same here, the PID is taking 2 32-bit entries.
>
> Now, I agree that this is far from obvious, and if Rob is okay, I'd
> like to propose a different binding to avoid having to define these
> macros:
>
> reg = <i2c_addr_or_i3c_static_addr pid_msb pid_lsb>;
>
> If pid_msb and pid_lsb are 0, then the node is defining an I2C device

Actually, I meant pid_msb == 0. This part of the PID is encoding the
manufacturer, and I don't think 0 is a valid manufacturer (I hope it's
not). So, we'd have something like:

reg = <i2c_addr_or_i3c_static_addr pid_msb pid_lsb_or_i2c_lvr>;

> (AFAICT, 0 is not a valid PID), otherwise it's an I3C device. This way
> we get rid of the IS_I2C_DEV flag, and we can get rid of those macros
> without making I3C dev node definition too painful (the only part
> developers will have to get right is the PID)
>
> >
> > > +
> > > +#define I3C_DEV_WITH_STATIC_ADDR(addr, manufid, partid, \
> > > + instid, extrainfo) \
> > > + (addr) I3C_PID(manufid, partid, instid, extrainfo)
> > > +
> > > +#define I3C_DEV(manufid, partid, instid, extrainfo) \
> > > + I3C_DEV_WITH_STATIC_ADDR(0x0, manufid, partid, \
> > > + instid, extrainfo)
> > > +
> > > +#endif
> >
>

\
 
 \ /
  Last update: 2018-10-03 21:06    [W:0.039 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site