lkml.org 
[lkml]   [2018]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] irqchip/mbigen: add support for a MBIGEN generating SPIs
Date
Now with
5052875 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller"),
we can support MBIGEN to generate message based SPIs by writing GICD_SETSPIR.

The first 64-pins of each MBIGEN chip is used to generate SPIs, and each
MBIGEN chip has several MBIGEN nodes, every node has 128 pins for generating
LPIs. The total pins are: 64(SPIs) + 128 * node_nr(LPIs). So we can translate
the pin index in a unified way in mbigen_domain_translate().

Also Add TYPE and VEC registers that used by generating SPIs, the driver can
access them when MBIGEN is used to generate SPIs.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
drivers/irqchip/irq-mbigen.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index f05998f..72db969 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -48,6 +48,7 @@
#define MBIGEN_NODE_OFFSET 0x1000

/* offset of vector register in mbigen node */
+#define REG_MBIGEN_SPI_VEC_OFFSET 0x500
#define REG_MBIGEN_LPI_VEC_OFFSET 0x200

/**
@@ -62,6 +63,7 @@
* This register is used to configure interrupt
* trigger type
*/
+#define REG_MBIGEN_SPI_TYPE_OFFSET 0x400
#define REG_MBIGEN_LPI_TYPE_OFFSET 0x0

/**
@@ -79,6 +81,9 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
{
unsigned int nid, pin;

+ if (hwirq < SPI_NUM_PER_MBIGEN_CHIP)
+ return (hwirq * 4 + REG_MBIGEN_SPI_VEC_OFFSET);
+
hwirq -= SPI_NUM_PER_MBIGEN_CHIP;
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
pin = hwirq % IRQS_PER_MBIGEN_NODE;
@@ -92,6 +97,13 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
{
unsigned int nid, irq_ofst, ofst;

+ if (hwirq < SPI_NUM_PER_MBIGEN_CHIP) {
+ *mask = 1 << (hwirq % 32);
+ ofst = hwirq / 32 * 4;
+ *addr = ofst + REG_MBIGEN_SPI_TYPE_OFFSET;
+ return;
+ }
+
hwirq -= SPI_NUM_PER_MBIGEN_CHIP;
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE;
@@ -162,14 +174,22 @@ static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
u32 val;

base += get_mbigen_vec_reg(d->hwirq);
+
+ /*
+ * The address of GICD_SETSPI_NSR and GITS_TRANSLATER
+ * is encoded in mbigen register by default. So,we don't
+ * need to program the doorbell address at here.
+ */
+ if (d->hwirq < SPI_NUM_PER_MBIGEN_CHIP) {
+ writel_relaxed(msg->data, base);
+ return;
+ }
+
val = readl_relaxed(base);

val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
val |= (msg->data << IRQ_EVENT_ID_SHIFT);

- /* The address of doorbell is encoded in mbigen register by default
- * So,we don't need to program the doorbell address at here
- */
writel_relaxed(val, base);
}

@@ -182,8 +202,7 @@ static int mbigen_domain_translate(struct irq_domain *d,
if (fwspec->param_count != 2)
return -EINVAL;

- if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) ||
- (fwspec->param[0] < SPI_NUM_PER_MBIGEN_CHIP))
+ if (fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM)
return -EINVAL;
else
*hwirq = fwspec->param[0];
--
1.8.3

\
 
 \ /
  Last update: 2018-10-26 09:53    [W:0.073 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site