lkml.org 
[lkml]   [2018]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v6 2/4] mpt3sas: Fix Sync cache command failure during driver unload
Date
This is to fix Sync cache and start stop command
failures with DID_NO_CONNECT during driver unload.

1) Release drives first from SML, then remove internally
in driver.
2) And allow sync cache and Start stop commands to firmware,
even when remove_host flag is set

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 38 ++++++++++++++++++++++++++++++--
drivers/scsi/mpt3sas/mpt3sas_transport.c | 7 ++++--
2 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 4d73b5e..df56cbe 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3748,6 +3748,40 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
return _scsih_check_for_pending_tm(ioc, smid);
}

+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ * issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd)
+{
+
+ if (ioc->pci_error_recovery)
+ return false;
+
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+ if (ioc->remove_host)
+ return false;
+
+ return true;
+ }
+
+ if (ioc->remove_host) {
+
+ switch (scmd->cmnd[0]) {
+ case SYNCHRONIZE_CACHE:
+ case START_STOP:
+ return true;
+ default:
+ return false;
+ }
+ }
+
+ return true;
+}

/**
* _scsih_sas_control_complete - completion routine
@@ -4571,7 +4605,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
return 0;
}

- if (ioc->pci_error_recovery || ioc->remove_host) {
+ if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
@@ -9641,6 +9675,7 @@ static void scsih_remove(struct pci_dev *pdev)

/* release all the volumes */
_scsih_ir_shutdown(ioc);
+ sas_remove_host(shost);
list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
list) {
if (raid_device->starget) {
@@ -9682,7 +9717,6 @@ static void scsih_remove(struct pci_dev *pdev)
ioc->sas_hba.num_phys = 0;
}

- sas_remove_host(shost);
mpt3sas_base_detach(ioc);
spin_lock(&gioc_lock);
list_del(&ioc->list);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index bc1e67b..7d722b9 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -807,10 +807,13 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
mpt3sas_port->remote_identify.sas_address,
mpt3sas_phy->phy_id);
mpt3sas_phy->phy_belongs_to_port = 0;
- sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+ if (!ioc->remove_host)
+ sas_port_delete_phy(mpt3sas_port->port,
+ mpt3sas_phy->phy);
list_del(&mpt3sas_phy->port_siblings);
}
- sas_port_delete(mpt3sas_port->port);
+ if (!ioc->remove_host)
+ sas_port_delete(mpt3sas_port->port);
kfree(mpt3sas_port);
}

--
1.8.3.1
\
 
 \ /
  Last update: 2018-10-23 12:25    [W:0.195 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site