Messages in this thread | | | From | Fabio Estevam <> | Date | Mon, 22 Oct 2018 09:35:32 -0300 | Subject | Re: [PATCH 1/2] ARM: dts: ccimx6ulsbcpro: Add support for AUO G101EVN010 display |
| |
Hi Alex,
On Mon, Oct 22, 2018 at 7:34 AM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
> + g101evn010: display@0 { > + bits-per-pixel = <16>; > + bus-width = <18>; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: timing0 { > + clock-frequency = <68930000>; > + hactive = <1280>; > + vactive = <800>; > + hfront-porch = <120>; > + hback-porch = <0>; > + hsync-len = <8>; > + vback-porch = <10>; > + vfront-porch = <0>; > + vsync-len = <6>; > + hsync-active = <1>; > + vsync-active = <1>; > + de-active = <1>; > + pixelclk-active = <0>;
The recommendation is not to put the panel timings in the dts file anymore.
You could add an entry for this panel into the simple-panel driver and then reference its compatible string in the board dts.
| |