lkml.org 
[lkml]   [2018]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
Date
Add DT binding documentation for the Linux driver for the SiFive
asynchronous serial IP block.

Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
v3: update description and example for compatible strings, per
discussion with Rob Herring.

.../bindings/serial/sifive-serial.txt | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/sifive-serial.txt

diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.txt b/Documentation/devicetree/bindings/serial/sifive-serial.txt
new file mode 100644
index 000000000000..a426b18ba049
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.txt
@@ -0,0 +1,33 @@
+SiFive asynchronous serial interface (UART)
+
+Required properties:
+
+- compatible: should be something similar to
+ "sifive,<chip>-uart<version>" for the UART as integrated
+ on a particular chip, and "sifive,uart<version>" for the
+ general UART IP block programming model. Supported
+ compatible strings as of the date of this writing are:
+ "sifive,fu540-c000-uart0" for the SiFive UART v0 as
+ integrated onto the SiFive FU540 chip, or "sifive,uart0"
+ for the SiFive UART v0 IP block with no chip integration
+ tweaks (if any)
+- reg: address and length of the register space
+- interrupts: Should contain the UART interrupt identifier
+- clocks: Should contain a clock identifier for the UART's parent clock
+
+
+UART RTL that corresponds to the IP block version numbers can be found
+here:
+
+https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart
+
+
+Example:
+
+uart0: serial@10010000 {
+ compatible = "sifive,fu540-c000-uart0", "sifive,uart0";
+ interrupt-parent = <&plic0>;
+ interrupts = <80>;
+ reg = <0x0 0x10010000 0x0 0x1000>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+};
--
2.19.1
\
 
 \ /
  Last update: 2018-10-20 12:13    [W:0.670 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site