lkml.org 
[lkml]   [2018]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/2] Add SECO Boards CEC device driver
    Date
    This series of patches aims to add CEC functionalities to SECO
    devices, in particular UDOO X86.

    The communication is achieved via Braswell SMBus (i2c-i801) to the
    onboard STM32 microcontroller that handles the CEC signals. The driver
    use direct access to the PCI addresses, due to the limitations of the
    specific driver in presence of ACPI calls.

    The basic functionalities are tested with success with cec-ctl and
    cec-compliance.

    Ettore Chimenti (2):
    media: add SECO cec driver
    seco-cec: add Consumer-IR support

    MAINTAINERS | 6 +
    drivers/media/platform/Kconfig | 21 +
    drivers/media/platform/Makefile | 4 +
    drivers/media/platform/seco-cec/Makefile | 1 +
    drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++
    drivers/media/platform/seco-cec/seco-cec.h | 143 ++++
    6 files changed, 1034 insertions(+)
    create mode 100644 drivers/media/platform/seco-cec/Makefile
    create mode 100644 drivers/media/platform/seco-cec/seco-cec.c
    create mode 100644 drivers/media/platform/seco-cec/seco-cec.h

    --
    2.18.0

    \
     
     \ /
      Last update: 2018-10-02 19:07    [W:2.318 / U:0.100 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site