lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 08/14] ARM64: dts: hisilicon: Add tsensor interrupt name
On Tue, Sep 25, 2018 at 11:03:06AM +0200, Daniel Lezcano wrote:
> Add the interrupt names for the sensors, so the code can rely on them
> instead of dealing with index which are prone to error.
>
> The name comes from the Hisilicon documentation found on internet.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> .../bindings/thermal/hisilicon-thermal.txt | 3 ++
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 63 +++++++++++-----------
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 1 +
> 3 files changed, 36 insertions(+), 31 deletions(-)

Lots of whitespace errors reported by checkpatch.pl.

>
> diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
> index cef716a..3edfae3 100644
> --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
> @@ -7,6 +7,7 @@
> region.
> - interrupt: The interrupt number to the cpu. Defines the interrupt used
> by /SOCTHERM/tsensor.
> +- interrupt-names: The interrupt names for the different sensors

Need to define what the names are.

> - clock-names: Input clock name, should be 'thermal_clk'.
> - clocks: phandles for clock specified in "clock-names" property.
> - #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
> @@ -18,6 +19,7 @@ for Hi6220:
> compatible = "hisilicon,tsensor";
> reg = <0x0 0xf7030700 0x0 0x1000>;
> interrupts = <0 7 0x4>;
> + interrupt-names = "tsensor_intr";

That name seems pretty pointless.

> clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
> clock-names = "thermal_clk";
> #thermal-sensor-cells = <1>;
> @@ -28,5 +30,6 @@ for Hi3660:
> compatible = "hisilicon,hi3660-tsensor";
> reg = <0x0 0xfff30000 0x0 0x1000>;
> interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "tsensor_a73";

Just 'a73' is sufficient.

> #thermal-sensor-cells = <1>;
> };

\
 
 \ /
  Last update: 2018-10-15 18:29    [W:0.407 / U:1.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site